Pore-scale mechanisms of CO2 flooding in heavy oil revealed by micron-scale CT imaging
Abstract
In response to the problems of high viscosity caused by high contents of kerogen and asphaltene in heavy oil, poor conventional water flooding effect, high energy consumption of thermal recovery, and high carbon emissions, this paper conducts a microscopic mechanism study on CO2 flooding of heavy oil based on micro-millimeter X-ray CT scanning. Taking real core samples as the object, the three-dimensional digital core is reconstructed using Micro-CT sequence images. To address the difficulties of complex gray-scale gradients and blurred mineral-fluid boundaries in segmentation, the U-Net deep convolutional network is introduced to achieve semantic segmentation of pore structure, and through inter-layer alignment and voxel mapping, a pore throat network with real spatial topology is obtained. On this basis, coupled with multiphase flow numerical simulation, the migration, dissolution-diffusion and displacement evolution laws of CO2 at the pore scale are quantitatively characterized. The results show that in the initial injection stage, CO2 is controlled by high viscosity and exhibits significant viscous advancement, which rapidly breaks through along the high-permeability path. After the breakthrough, it is prone to circulate in the dominant channels, while the peripheral fine pores are underutilized, and the recovery rate increases gradually; with the increase of cumulative injection volume, a continuous concentration gradient forms between the dominant channels and the remaining heavy oil, the dissolution-diffusion effect strengthens, the displacement changes from “advancement by sticking” to “network diffusion”, and local demulsification and swelling energy drive the residual oil to undergo non-steady-state displacement, achieving secondary expansion of the microscopic sweep volume. The injection speed is regulated by changing the Peclet number to control the convection-diffusion competition: in high Pe conditions, convection is dominant, insufficient contact time leads to diffusion limitation, and the sweep zone becomes narrower; moderately reducing the injection speed can extend the contact time, strengthen diffusion demulsification, and make the front advance more smoothly. The complexity of pore topology (coordination number, pore size distribution, curvature, etc.) further determines the diversification of flow paths and local diffusion effects, thereby affecting the three-dimensional occurrence and utilization of residual oil. The study deepens the microscopic understanding of CO2 flooding of heavy oil at the pore scale and can provide theoretical basis for optimizing field injection and production parameters.