Coupled effects of bio-carrier type and filling ratio on electroactive biofilm formation and extracellular electron transfer in MBBR-MFCs.
Abstract
Electroactive biofilm (EAB) organization and extracellular electron transfer (EET) govern moving-bed biofilm reactor-microbial fuel cell (MBBR-MFC) performance, yet the coupled effects of bio-carrier type and filling ratio remain unclear. We compared bioceramic, biochar, polyurethane sponge, and conductive sponge, and evaluated filling-ratio effects for polyurethane sponge and biochar. Polyurethane sponge modulated anode biofilm accumulation and composition and yielded the highest and most stable voltage (0.109 ± 0.008 V) and the lowest charge-transfer resistance (7.20 Ω). Increasing its filling ratio reduced anode-associated biomass while sustaining power generation. At a volumetric filling ratio of 20%, PS20-MFC achieved the highest power density (0.118 ± 0.011 W m-2), with ammonium-nitrogen (NH4+-N) and total nitrogen (TN) removals of 64.61% and 62.49%, respectively. Biochar modestly improved electron recovery, with BC15-MFC achieving the highest cytochrome c (Cyt-c) content (1.81 ± 0.72 mg g-1) and coulombic efficiency (6.16 ± 1.21%). At higher biochar filling ratios, Geobacter was relatively more abundant in carrier biofilms than in anode biofilms. This spatial pattern, together with the electrochemical results, suggests that carrier-associated communities may contribute to the observed differences in electron recovery. However, the higher electron recovery was accompanied by only limited gains in nitrogen removal, indicating distinct responses of these two reactor functions to biochar addition. Thus, bio-carrier type shapes the dominant regulatory response, whereas filling ratio modulates biofilm organization and electron recovery, providing mechanistic insights to guide MBBR-MFC design.