Fault-Tolerant Adaptive Output-Feedback Prescribed-Time Control of Uncertain Active Suspension Systems via Preset Trajectories
Abstract
This article addresses the problem of adaptive output-feedback prescribed-time tracking control using preset trajectories for uncertain active suspension systems (ASSs) with electromagnetic actuator dynamics, actuator faults, and input voltage saturation. The prescribed time represents a system-level suspension-recovery requirement. A key contribution lies in the introduction of a time-varying zero-initialization function that extends preset-trajectory-based control to an adaptive output-feedback design. Combined with a preset error trajectory, this function defines state-estimation, parameter-estimation, and control errors with zero initial values despite unknown initial values of the unmeasured states and nonzero parameter estimates. A neural-network-based adaptive state estimator reconstructs the unmeasured states from the suspension-deflection measurement, while adaptive laws compensate for unknown nonlinearities and actuator faults. An adaptive fault-tolerant controller is then designed using the preset error trajectory and an input-saturation compensator. A projection-based adaptive law keeps the loss-of-effectiveness estimate positive, and conditions for selecting trajectory coefficients are derived. Stability analysis establishes practical prescribed-time tracking and semiglobal boundedness of all closed-loop signals. To represent practical operating conditions, comparative simulations are conducted under an ISO 8608 Class A road profile with localized depressions, actuator faults, and input voltage limits. The results show that the proposed method achieves earlier suspension recovery with a substantially lower peak actuator voltage than the existing fault-tolerant controller. Furthermore, simulations at different prescribed times quantify the tradeoff among sprung-mass acceleration, body displacement, and actuator demand, and 30 Monte Carlo runs show consistent responses under variations in model parameters, fault occurrence time, and road profile.