Cube-Drone: A Hybrid Multi-Rotor Robotic Platform for 3D Mapping and Ultrasonic Inspection in Complex Structures
Abstract
This paper presents the design and development of a multi-rotor drone called Cube-Drone, a hybrid aerial–ground multirotor robot designed for inspection in confined and complex civil infrastructures such as bridges, culverts, and high-rise structures. The platform combines aerial access with surface operation to support an inspection-centric workflow: rapid 3D reconstruction to localize and select regions of interest, followed by repeatable close-range and contact-based measurements using an onboard linear actuator and ultrasonic thickness gauge. The robot carries a 3D LiDAR, camera, onboard computer, and inspection payload while remaining capable of both flight and ground traversal. For flight control, we implement a nonlinear model predictive controller (NMPC) deployed on a resource-constrained embedded processor (Teensy 4.1), enabling onboard optimization-based control without relying on commercial autopilot stacks. We further integrate a LiDAR–inertial mapping pipeline and evaluate its performance and robustness through simulations and real-world experiments, including inspection deployments on representative infrastructure environments. Experimental results demonstrate stable hybrid operation, accurate mapping for inspection planning, and successful acquisition of visual and structural inspection measurements.