Skip to content
Open access

Accurate Measurement of 3-D and 2-D Circular Centers With Application to LiDAR–Camera Extrinsic Calibration

2026 · IEEE Transactions on Instrumentation and Measurement · Vol 75, pp. 9538412-9538412 · 0 citations · 47 references

Abstract

Accurate measurement of circular centers is a fundamental geometric sensing problem in instrumentation and measurement tasks involving cameras, light detection and ranging (LiDARs), and other spatial sensors. In circular-target-based LiDAR–camera extrinsic calibration, a 3-D circular center measured from LiDAR and its corresponding 2-D projected center measured in the image serve as cross-modal geometric observations for estimating the rigid transformation between the two sensor frames. Conventional pipelines can bias both measurements: the 3-D center is often obtained by sequential plane fitting, point projection, and 2-D circle fitting, while the image ellipse center is frequently treated as the projected circle center even though the two generally differ under perspective projection. This article focuses on accurate 3-D and 2-D circular-center measurement and uses LiDAR–camera extrinsic calibration as a representative application. A conformal-geometric-algebra (CGA)estimator is integrated with RANSAC to jointly recover the 3-D center, normal, and radius from noisy or partially observed LiDAR points. A chord-length-variance criterion then estimates the 2-D projected center, with its twofold ambiguity resolved by homography validation or a quasi-RANSAC fallback. Synthetic and real-sensor experiments show that the proposed method improves circular-center measurement accuracy and reduces extrinsic calibration error across different target and sensor configurations.

Read PDF

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.