Distributed Fibre Optic Acoustic Sensing for Real-Time Multiphase Flow Characterization and Leak Detection in Pipelines: Integration of Constellation FibreWrap Technology with Dense Array Sensing
Abstract
Accurate real-time monitoring of multiphase flow dynamics and leak detection in pipelines remains critical for operational efficiency and safety in the oil and gas industry. This study presents an initial investigation on how the advanced distributed fiber optic acoustic sensor (DAS) combined with an enhanced backscatter engineered fiber can be used for high-resolution multiple zones flow metering and anomaly event detection along a pipeline such as leak. Utilizing engineered fiber, allows a rapid non-intrusive installation of the optical fiber at critical locations along the pipe with fine resolution and high sensitivity with more than 20 dB improvement in acoustic noise floor compared to standard fibre when combined with the advanced DAS technology. Experimental testing was conducted at Hamad Bin Khalifa University's multiphase flow loop with comprehensive test matrices including single-phase, two-phase, three-phase flows. The experimental setup includes a 5.08 cm diameter and 6 m long pipe, with three artificially induced leak sizes, i.e., 3 mm, 2.5 mm, and 1.8 mm, which are spaced 90 mm apart. With the current setup restrictions, only a short section (60 cm) of the pipe at the inlet and at the outlet of the pipe were instrumented with the engineered fiber for measuring the DAS (Distributed Acoustic Sensing) derived apparent velocity. The results demonstrate the capability to measure fluid apparent velocity for a single-phase flow that shows good agreement with experimental results. The multiphase flow exhibits significant variations in the fluid apparent velocity behaviour at the inlet and outlet of the pipe sections. The velocity-pattern variations were analysed separately to evaluate controlled single-phase leakage and flow-regime-dependent behaviour under no-leak air–water conditions. The results demonstrate the ability to distinguish between mixed and separated flow regimes and the possibility of tracking flow structure formation during multiphase transitions. A dedicated fiber optic installation using the 25 cm gauge-length dense array configuration for an accurate fluid characterisation, including leak event identification, such as using speed of sound is also being considered. This distributed sensing approach provides a scalable, nonintrusive solution for real-time pipeline integrity monitoring, significantly enhancing operational decision-making and reducing response time to anomalies in complex multiphase systems.