Sideband Suppression and Power Efficient Hybrid Beamforming Using Time-Modulated Arrays for Millimeter Wave Communications
Abstract
Hybrid beamforming is an essential technique to overcome the high path-loss of millimeter wave (mmWave) communications and allows a design trade-off between complexity and performance of fully digital and analog beamforming. However, the conventional implementation method of using phase shifters for the analog beamforming introduces high complexity, due to the high accuracy requirement of these phase shifters, as well as high energy cost and latent synchronization issues. Research has shown that time-modulated arrays (TMA) can be used as an alternative method for the analog beamforming. However, one challenge generated by TMA is its unwanted harmonic signals, which cause sideband interference. Hence, in this paper, we design TMA-assisted hybrid beamforming with the objectives to reduce the sideband interference and increase the power efficiency when using TMA implementation based on single-pole-single-throw switches. Accordingly, an optimization problem for precoder design is proposed with the objective to attain a good trade-off among spectral efficiency, sideband level and power efficiency. The optimization problem is then solved with our proposed algorithms to obey various TMA constraints. Furthermore, the performance of the TMA-assisted hybrid beamforming systems with different design alternatives and system parameters is investigated and compared. Our studies and performance results demonstrate that our methods are capable of enabling the TMA-assisted hybrid beamforming systems to attain a good trade-off among spectral efficiency, sideband interference suppression and energy efficiency. They allow to achieve the spectral efficiency close to that of the fully digital precoder, while providing significantly lower sideband signal level and higher energy efficiency.