Hybrid Delay Alignment Techniques for Low-Area Wideband Continuous-Time Pipelined ADCs
Abstract
This paper describes a continuous-time pipelined (CTP) ADC featuring two hybrid delay alignment techniques: the all-pass filter (APF) + high-pass filter (HPF) and the all-pass filter + finite-impulse-response (FIR) filter hybrid delay alignment techniques. The APF+HPF hybrid delay alignment technique significantly suppresses the signal leakage without increasing the overall area or noise overhead. The APF+FIR hybrid delay alignment technique enhances the robustness of the delay alignment against the process variation, mitigating the demand on the delay network calibration in the later CTP stages. The key points of these two techniques are discussed in detail in this paper. The prototype ADC was fabricated in a 28 nm CMOS process. This ADC achieves 71.8 dB peak SNDR over a 450 MHz bandwidth at 4 GS/s $f_{s}$ . The core area of this ADC is only 0.16 mm2, which is the smallest reported among all CTP ADCs with over 70 dB SNDR. It also achieves a competitive Schreier figure of merit (FoMS) of 163.2 dB, which ranks among the highest reported for CT ADCs with over 200 MHz bandwidth.