Sep 2026· International Conference on Electromagnetics in Advanced Applications· pp. 0434-0439· 0 citations· 7 references
Abstract
In Frequency Diverse Array (FDA) radar systems, range-angle dependent beampatterns with low sidelobe levels can be achieved through amplitude weight optimization. However, these optimal solutions require independent amplitude control mechanisms for each antenna element of the array, leading to high system complexity. To address this issue, a K-means based amplitude clustering strategy with additional practical constraints, including relative spread and maximum group size limits is proposed. This approach allows multiple antenna elements to share common amplitude levels and enforce symmetry, thus decreasing the feeding network by approximately 50% while no significant degradation is observed in sidelobe levels. Overall, the results indicate that K-means-based amplitude clustering significantly reduces the number of independent amplitude controls and promotes symmetrical architecture, enabling cost- and power-efficient FDA implementations without degrading the optimized beampattern characteristics.
Mutual coupling among array receiving antennas in passive detection systems can introduce amplitude and phase inconsistencies between antenna elements. The resulting amplitude and phase errors across receiving channels not only affect the spectral peak values in subsequent MUSIC-based direction finding, but also cause...
Xiao-Ming Wu, Wen-Can Cheng, Feng-Tong Mei et al.· Italian National Conference...· 0 citations
Phased arrays are fundamental to radars and wireless communications. In such systems, the patch antenna element remains one of the most used radiators due to its low profile and ease of fabrication. However, its design involves a trade-off between bandwidth and scan range. To alleviate some of the trade-off effects, pa...
P. Peshev, D. Caratelli, G. Federico et al.· European Microwave Conferenc...· 0 citations
Fully digital phased-array radars (PARs) have several advantages over conventional architectures, including flexible multibeam steering, adaptive beamforming, and signal-to-noise ratio (SNR) improvement in array gain due to the independence of receiver noise across array elements. However, the resulting data volume pos...
Ayano Ueki, Robert D. Palmer, Boonleng Cheong et al.· IEEE Transactions on Radar S...· 0 citations
High angular resolution is essential for fine images in modern radar applications, which typically requires a large virtual antenna array. However, such large arrays give rise to near-field effects, necessitating wavefront-curvature compensation and consequently increasing computational complexity. In this paper, we pr...
Gunhwi Moon, Jeong-Hoon Park, Soram Kim et al.· IEEE Access· 0 citations
Multibeam synthesis often relies on iterative optimization, whose computational cost and convergence time can increase substantially when the gains of different beams are unevenly distributed, making direct control of their relative gains difficult. To address this issue, a multibeam array synthesis and gain-allocation...
Chen-Shuo Chu, Hai-Tao Lu, Peng Xu et al.· Italian National Conference...· 0 citations
In integrated sensing and communication (ISAC), the same base-station array beamforms toward users and estimates their angle of arrival (AoA). In this paper, we study how element-level gain, phase, and position errors affect both functions of a beam-scanning uniform linear array. Any array produces a correlation peak a...
Xuan Chen, L. Le Magoarou· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.