Fluid antenna arrays (FAAs) reconfigure their effective aperture by activating radiation ports from a dense set of candidate positions within a finite physical region, thereby offering geometry diversity beyond conventional fixed arrays. This paper studies arbitrary-direction far-field beam synthesis with a planar FAA. Since a fixed array adapts its beamforming weights on a predetermined spatial sampling structure, its ability to match desired beam patterns is limited when both the aperture and the number of active elements are constrained. To exploit the geometry diversity of the FAA, we propose a coarse-to-fine scheme that couples discrete port selection with continuous joint refinement. In the coarse stage, a fast Fourier transform (FFT) based phase retrieval step converts the amplitude-only beam specification into an aperture-compatible complex target, after which an FFT-tailored greedy method selects the active ports and least squares initializes their complex weights. In the fine stage, a projected adaptive moment estimation procedure jointly refines the continuous port positions and beamforming weights while enforcing the minimum interelement spacing. For the evaluated two-beam configuration, the proposed scheme increases the mainlobe energy fraction from 35.73% to 48.92% and reduces the peak sidelobe level from -2.30 dB to -3.83 dB relative to a fixed array with the same aperture and active-port count.
Fluid antenna systems (FASs) have shown that activating a single port from a densely packed antenna array can yield spatial diversity comparable to that of tens of independent antennas, a property that has substantially improved communication reliability and efficiency. The fluid antenna array (FAA) extends this concep...
Wang-Qi Shi, Zhen-Tian Zhang, Hao Jiang et al.· 0 citations
Movable-antenna arrays reshape their aperture by repositioning radiating elements, which adds spatial degrees of freedom that a fixed lattice cannot access. Worst-case robust beamforming is a natural tool for such arrays, but it relies on uncertainty margins fixed at design time. Those margins are no longer valid once...
Ayman Elnashar· IEEE Journal of Selected Are...· 0 citations
This paper establishes a finite-aperture model for pattern-reconfigurable antennas (PRAs) and exploits its aperture-constrained Fourier representation to develop an efficient multiuser beamforming framework. First, we develop an ideal model by representing the complex radiation pattern using a Fourier series. By applyi...
Kang-Jian Chen, Han-Qing Yang, Hang Wong· 0 citations
Multiple-input multiple-output (MIMO) systems rely on spatial degrees of freedom, but fixed antenna geometries cannot adapt to propagation environments. Movable antenna (MA) systems address this by adapting antenna positions to the channel. In discrete MA architectures, active antennas are selected from candidate posit...
Amna Irshad, Luca Antonelli, V. Petrov et al.· 0 citations
Multibeam synthesis often relies on iterative optimization, whose computational cost and convergence time can increase substantially when the gains of different beams are unevenly distributed, making direct control of their relative gains difficult. To address this issue, a multibeam array synthesis and gain-allocation...
Chen-Shuo Chu, Hai-Tao Lu, Peng Xu et al.· Italian National Conference...· 0 citations
System-level assessment of per-user and sum-rate spectral efficiencies across varying signal-to-noise (SNR) regimes reveals how the inter-beam overlap dictates a fundamental trade-off between user capacity and inter-user interference, delivering design guidelines for future near-field communications.
V. Centritto, S. Droulias, Angeliki Alexiou· arXiv.org· 2 citations· ⚡1
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.