Concentration and Distribution of Heavy Metals in Andisols and Vertisols of the Azuay Andes (Equador)
Abstract
At present many governmental and environmental bureaus are interested in establishing reliable soil quality criteria for heavy metals to enable the detection of polluted sites. To evaluate thе variation of heavy metal natural concentration аnd to assess heavy metal contamination in soils, it is necessary to survey heavy metal baseline levels in order to understand their migration and distribution during pedogenesis. Many nationwide projects report elemental baseline values in soils. Baseline levels of heavy metals in soils have also been determined at local scales. Data is scarce оn qualitative and quantitative trace elements content of Equatorian soils. The soils in the Azuay Andes (S of Equator) are thought to be generally non-contaminated. The objectives of this study are: 1) to determine the natural concentrations of seven heavy metals (Cd, Co, Cr, Cu, Ni, Pb and Zn) in soils of two orders, Andisol and Vertisol, in Azuay Andes, and 2) to evaluate the correlation between metal concentration and soil properties. Soil samples were ground in an agate mill рпог to pseudototal heavy metal analysis. Cadmium, Co, Cr, Cu, Ni, Pb and Zn were determined by a masses spectrometer (MS-ICP) after aqua regia extraction according to ISO standard procedures. Soil particle size distribution, organic carbon, electrical conductivity and pH have been previously determined. Andisols are dominated by amorphous aluminium silicates and Al-organic complexes. The soils of volcanic area usually have an Ah-Bh-Bhs/Bw-C horizon sequence. The Ah horizon is dark-coloured аnd normally very high in organic matter, ranging from 6.4 to 15.2%. A strong rise in pH upon addition of afluoride solution is used to signal the presence of allophane. The pH usually rises to 10.5 bellow 20 cm. The range of total soil values т mgkg-1 is аs follows: Са (0.03-0.3), Co (0.8-5), Сг (7-1 5), Сu (9-25), Ni(2-4), РЬ (11-41) аnd Zn (12-37). All heavy metal contents, except for Cd, аrе strongly correlated with pH. For the pseudototal fraction, there was significant difference between the soil layers, in regards to complex profile development. Vertisols are dominated by specific clay minerals with intersecting slickenside’s in the subsoil аnd wedge-shaped structural aggregates in the subsurface soils (10-100 сm). These soils have аn A-Bss-Bssg-Cg horizon sequence with deep аnd dark topsoils аnd strong gley in the subsurface soil (> 65 cm). The range of total soil values in mgkg-1 аs follows: Сd (0.05-0.2), Co (9-40), Сr (11-72), Сu (7-50), Ni (7-45), РЬ (11-18), Zn (67-110). Only Cu, Ni and Zn аrе strongly correlated with clay content. For thе pseudototal fraction, there was no significant difference between the soil horizons, in regards to the strong homogenisation by shrinkage and swelling. In general, metal content in soils decreased significantly from Vertisol to Andisol reflecting the pedogenic factors that determine pH, organic matter and clay content variation between soil profiles.