Skip to content
Open access

A Rapid Phase-Error Self-Detection and Compensation Architecture for MEMS Gyroscopes

Nov 2026 · IEEE Sensors Journal · Vol 26, pp. 32209-32218 · 0 citations · 30 references

Abstract

The phase error introduced by the drive-sense interface circuitry of micro-electromechanical system (MEMS) gyroscopes not only prevents the system from achieving accurate resonant-frequency locking but also introduces stiffness coupling in the detection output, significantly degrading overall performance. Conventional phase-delay calibration methods, including high-precision discrete frequency sweeping and AGC-based optimization, typically require prolonged test times and suffer from start-up difficulties, which are especially severe for high-Q gyroscopes. To address these issues, this article presents a rapid phase detection architecture for gyroscopes based on the phase–frequency characteristics and two-point linear extrapolation. By compensating the phase errors in both the drive- and sense-loop circuits, the proposed method enables fast and stable resonant locking of the drive mode while mitigating quadrature coupling in the sense mode. Experimental results demonstrate that, compared with traditional sweep methods of equivalent accuracy, the proposed method offers the following advantages: 1) higher efficiency, requiring only two-point measurement and reducing the sweep time from 516 to 2 s; 2) better temperature adaptability; and 3) improved closed-loop control performance, where the bias error is reduced to 5% of its original value and the bias instability (BI) decreases from 1.8 °/h to 0.7 °/h. These advantages make it more suitable for rapid batch calibration.

Read PDF

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.