Skip to content

A molecularly imprinted electrochemical sensor based on AuNPs/PB/CNT for ultra-wide-range cholesterol detection.

Nov 2026 · Analytical Methods · 0 citations · 30 references
Medicine

TL;DR

This work developed a non-enzymatic MIP electrochemical sensor based on an AuNPs/PB/CNT composite that exhibited an ultra-wide linear range from 10 pM to 200 µM and a detection limit of 0.37 pM and showed good agreement with commercial assays in real-sample analysis and excellent selectivity in the presence of common interfering species.

Abstract

Rapid and reliable cholesterol detection is crucial for the early prevention and management of cardiovascular diseases. However, existing molecularly imprinted polymer (MIP)-based electrochemical cholesterol sensors are often limited by a narrow detection range, hindering their application to biofluids with widely varying cholesterol concentrations. Herein, we developed a non-enzymatic MIP electrochemical sensor based on an AuNPs/PB/CNT composite. Amino-functionalized multi-walled carbon nanotubes (NH2-MWCNTs) provided a conductive substrate with a large specific surface area and abundant imprinting sites, while in situ grown Prussian blue (PB) served as an embedded redox probe to enhance signal stability. Gold nanoparticles (AuNPs) further promoted electron transfer, improved material dispersibility, and amplified the electrochemical response. An o-Phenylenediamine (o-PD)-based imprinted film was electropolymerized on the composite surface to achieve selective cholesterol recognition. The resulting sensor exhibited an ultra-wide linear range from 10 pM to 200 µM and a detection limit of 0.37 pM. It also showed good agreement with commercial assays in real-sample analysis and excellent selectivity in the presence of common interfering species. This work provides an effective strategy for constructing wide-range, sensitive, and stable MIP-based cholesterol sensors.

View source

Similar papers

Oct 2026

Biomass cellulose-supported CuO-based molecularly imprinted photoelectrochemical sensing platform for highly sensitive and selective detection of lincomycin in food.

The presence of lincomycin (LIN) residues in animal-derived foods presents a potential threat to human health. A sensitive photoelectrochemical (PEC) sensor was developed for LIN detection using a water bamboo cellulose-supported copper oxide (CuO@WBC) composite as photoactive substrate. CuO particles with visible-ligh...

Wen-Qing Zhang, Si-Tong Huang, Jia Sun et al. · 0 citations
Open access Nov 2026

A Molecularly Imprinted Electrochemical Sensor Based on a Cu‐MOF/MXene–rGO Aerogel Composite for Highly Sensitive Cortisol Detection

As a major physiological hormone, cortisol plays a critical role in the human response to stress and disease, making its accurate and real‐time monitoring highly important for health management and clinical diagnosis. However, the performance of molecularly imprinted polymer (MIP)‐based electrochemical sensors is often...

Jing-Heng Yu, Xiang-Chuan Zhao, Heng-Chao Liu et al. · 0 citations
Sep 2026

An MWCNT-based dummy-template molecularly imprinted electrochemical sensor for detecting 2-methylisoborneol in water.

The typical off-flavor compound 2-methylisoborneol (2-MIB) is widely present in water bodies which induces unpleasant odors in water even at extremely low concentrations. It is urgent to develop a simplified laboratory-based electrochemical screening workflow for trace 2-MIB quantification since the traditional detecti...

Hao-Wen Hong, Jun Wu, Jian Lu · 0 citations
Sep 2026

Rationally designing CW@rGO nanocomposite for ultra-sensitive electrochemical detection of tert-butyl hydroquinone in food samples.

The widespread use of tert-butyl hydroquinone (TBHQ) as a synthetic antioxidant in food systems necessitates reliable strategies for rapid and precise determination, given potential health risks associated with overexposure. In this work, a novel electrochemical sensing interface was engineered by integrating Cr2WO6 (C...

Gunasekar Vijay, Antony Jasmine Vincent John, Shen-Ming Chen et al. · 0 citations
Open access Sep 2026

A boronate affinity-assisted molecularly imprinted electrochemical sensor based on Ti3C2@AuNPs nanocomposites for the detection of IgG in dairy products.

Immunoglobulin G (IgG), a critical immunologically active protein with oral bioavailability, has garnered significant attention as a functional nutrient in the food industry. However, its structural complexity and susceptibility to matrix interference in dairy products pose substantial challenges for rapid and reliable...

Ru-Yue Zhang, Xuan-Han Liu, Bi-Ni Wang et al. · 0 citations
Nov 2026

A novel ratiometric molecularly imprinted electrochemical microsensor with synergistic embedded signal and surface reference probes for non-electroactive Aβ42 detection.

Ratiometric molecularly imprinted electrochemical sensors (RMIESs) can mitigate electroactive surface area effects, background interference, and signal fluctuations while enhancing anti-interference capability and stability, but reported sensors are mainly suitable for electroactive targets. Herein, a novel RMIES strat...

Zi-Mei Yu, Xue Kong, Xing-Ying Chen et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.