Numerical Modeling of Tunnel Deformation near the Panagopoula Landslide in Greece using Finite Element Methods
Abstract
This study focuses on the analysis of ground deformations during the excavation of the south branch of the twin tunnel T26, constructed adjacent to the Panagopoula landslide — one of the largest landslides recorded in Greece. The tunnel, part of the Elefsina–Korinthos–Patras motorway, crosses a geologically heterogeneous zone dominated by limestones, cherts and Pleistocene conglomerates belonging to the Olonos-Pindos nappe system and affected by the active extensional tectonics of the Gulf of Corinth region (Central Hellenic Shear Zone). Ten geotechnical units (GU) were defined along the alignment, of which seven were encountered in the south bore that is analysed in this study. A combined analytical–numerical framework is applied: preliminary elastoplastic analysis using the convergence-confinement method provides stress-release coefficients, which are then used as staged-excavation inputs for two-dimensional finite element models based on the generalised Hoek-Brown failure criterion. The influence of the landslide on tunnel behaviour is manifested through degraded rock-mass quality, characterized by a low Geological Strength Index (GSI), rather than through direct modification of the in-situ stress regime, a distinction that is explicitly addressed in the methodology. Results show that crown displacements range from approximately 8 mm in competent limestones (GU-II(L), GSI 50) to 88 mm in poorly cemented conglomerates (GU-II(c), GSI 30), with the most critical sections requiring closed-type invert support. The combined approach is validated by internal consistency between analytical and numerical predictions, and its non-circular character is demonstrated.