Skip to content

Numerical Simulation of Complex Fracture Propagation Considering Production-Induced 4d Geomechanics Variation

Nov 2026 · ADIPEC · 0 citations · 6 references

Abstract

Unconventional reservoirs are commonly characterized by well-developed natural fractures, pronounced heterogeneity, and anisotropy. Long-term production continuously alters reservoir geomechanical conditions, resulting in substantial differences in complex hydraulic-fracture propagation between infill and parent wells. These differences critically influence infill-well placement and hydraulic-fracturing design. The evolution of fracture geometry is also a dominant control on post-stimulation productivity and estimated ultimate recovery (EUR).This study presents a numerical modeling framework for characterizing complex fracture propagation in infill wells while accounting for four-dimensional (4D) stress evolution induced by parent-well production. The model incorporates geomechanical heterogeneity, anisotropy, natural-fracture distributions, and coupled flow-geomechanical behavior during long-term depletion. Field data, including well-test, fracturing-treatment, and microseismic-monitoring data, are used to validate the proposed methodology.A case study from the X1 shale-gas block in China is used to investigate 4D in-situ stress evolution and its influence on fracture propagation in infill wells. The results indicate that long-term production reduces the horizontal principal stresses while increasing the horizontal stress contrast. Relative to the initial static stress state, the horizontal principal stresses decrease by 25.2%, whereas the horizontal stress contrast increases by 33.5%. Evolution of the dynamic stress field causes marked differences in hydraulic-fracture geometry between infill and parent wells. In particular, hydraulic-fracture complexity in infill wells is substantially reduced when fractures propagate into the previously stimulated region of a parent well. The proposed framework establishes quantitative relationships between the initial in-situ stress state and production-induced 4D stress evolution, thereby extending geomechanical characterization from static modeling to dynamic simulation. The results provide technical support for optimized infill-well placement and cost-effective, high-efficiency stimulation design in unconventional reservoirs.

View source

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.