Coupled Geomechanics-Flow Simulation of Deformation-Driven Pore Volume and Permeability Evolution, Fault Stability, and Intra-Reservoir Connectivity
Abstract
The implications for hydrocarbon and water production play a crucial role in the context of field development planning, with particular emphasis on the role of present-day stress orientation and natural fracture behavior in influencing well and completion design. A 4D geomechanics study was conducted in a heavily faulted and partially fractured stacked carbonate reservoir with the purpose of assessing the impact of fluid-flow coupled, mechanical reservoir deformation on pore volume and permeability evolution in both the rock matrix and fracture network, and evaluating associated risks of fault reactivation, reservoir compartmentalization breaches, and inter-reservoir communication, characterized by different strategies of hydrocarbon production, water and gas injection. A geomechanical field model was developed through the integration of static and structural frameworks, stochastic seismic inversion, offset well one-dimensional mechanical earth models, and dynamic reservoir simulations. A physics-based natural fracture prediction workflow is applied to characterize fracture distribution and properties. Reservoir pressures derived from a single-porosity dynamic model are coupled with the geomechanical model at multiple production time steps to simulate stress and strain evolution. The resulting deformation is translated into porosity and permeability updates, which are iteratively exchanged between the fluid-flow and geomechanical simulators over the production schedule. Results indicate that fracture networks and faulted zones exhibit significant sensitivity, with pronounced variability in fracture aperture potentially affecting fluid flow pathways. Fault stability analysis shows that most faults remain stable under current depletion and injection conditions. Nevertheless, localized critically stressed zones may develop near certain wells, introducing potential risks of compartmentalization breaches and inter-reservoir communication. The prevailing maximum horizontal stress orientation (approximately NWW) promotes critically stressed fractures aligned with fault trends, which may influence the hydraulic performance of horizontal wells drilled parallel to this direction. The coupled geomechanics simulation shows no pore collapse in the different reservoirs but minor elastic deformation barely affecting the porosity and permeability of the intact rock, because of the high rock strength and relatively small pressure changes experienced during the history and FDP. Nonetheless, the fracture network shows a significant deformation, impacting aperture, hence fracture porosity and permeability. This phenomenon might eventually impact the flow patterns, and repositioning of infill wells for both production and injection. Furthermore, some fault reactivation potential was observed in specific regions, characterized by heavy faulting, potential presence of natural fractures and subjected to drastic pressure changes. Reservoir deformation same as surface subsidence/uplift was minor, while drilling integrity might be affected by the reactivation of nearby critically stressed fracture networks and faults. Well and completions integrity seems not be at risk due to the high rock and cement strength, and casing design, limiting the amount of plastic deformation and potential failure to near zero, for the conditions of the proposed field development strategy.