High conversion efficiency of extreme ultraviolet light generation at 11 nm from a laser-produced Xe plasma
Abstract
Laser-produced xenon (Xe) plasma can emit extreme ultraviolet (EUV) radiation around 11.2 nm, which is regarded as a promising candidate for next EUV lithography due to its debris-free, long-term stable fuel supply and easy operation. However, the inherent free expansion of gas targets in vacuum distorts the gas density distribution, thereby lowering the EUV conversion efficiency (CE). This study simulates the CE of 11.2 nm EUV emitted from laser-produced Xe plasmas at axial positions of 0.50–1.50 mm away from the nozzle exit, under gas pressures ranging from 4–100 bar. The gas density distributions obtained from simulations are experimentally verified with a Nomarski interferometer, while the calculated EUV spectra were validated via EUV experimental spectroscopy. The results indicate that increasing the Xe pressure and positioning the laser focus closer to the nozzle exit improve both the laser absorption fraction and radiative conversion ratio, while slightly degrading the spectral purity. A maximum CE of approximately 7.8% is obtained at 11.2 nm within a 2% bandwidth. Furthermore, it is found that the emission region becomes smaller closer to the nozzle exit , offering a means to control source size. This work establishes, for the first time, a comprehensive theoretical framework for predicting and optimizing the CE of Xe-based EUV sources, and demonstrates its application potential for next-generation high-volume manufacturing lithography.