Skip to content
Open access

Robust and Secure Beamforming Design for Active RIS-Assisted ISAC Systems With Hardware Impairments and Imperfect Angular Information

2026 · IEEE Transactions on Wireless Communications · Vol 25, pp. 26067-26082 · 0 citations · 51 references

Abstract

This paper investigates a robust and secure beamforming design for an active reconfigurable intelligent surface (ARIS)-assisted integrated sensing and communication (ISAC) network. Specifically, it explicitly accounts for two critical practical challenges: hardware impairments (HWIs) originating from both transceivers and the ARIS itself, and imperfect angular information regarding a malicious target that acts as a potential eavesdropper. We formulate a worst-case average beampattern gain maximization problem under HWIs and angular uncertainty, subject to secrecy and communication requirements. To address the resulting non-convexity, a second-order Taylor series expansion is first employed to approximate the angular error vector, after which the $\mathcal {S}$ -Procedure is applied to convert the uncertainty constraints into tractable semidefinite forms. The dual-functional radar-communication base station beamforming and ARIS reflecting coefficients are then jointly optimized via an alternating optimization (AO) framework, where each sub-problem is efficiently handled through semidefinite programming. Numerical results validate the effectiveness of the proposed AO algorithm and demonstrate the robustness of the proposed ARIS-assisted ISAC network with robust beamforming design (ARIS-Robust) scheme, showing significantly higher average beampattern gain and a more dominant mainlobe around the estimated target directions, even under severe hardware distortions and angular mismatch.

Read PDF

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.