Skip to content

Borehole-Based Evaluation of Metamorphic Basement Properties for Next Generation Closed-Loop Geothermal Development

Nov 2026 · ADIPEC · 0 citations · 8 references

Abstract

Closed-loop geothermal development is inherently challenging when hosted in foliated metamorphic basement. This study analyses a feasibility well with two sidetracks to assess the geothermal potential of a complex metamorphic basement, characterize key geological and petrophysical properties, and identify drilling approaches and parameters that reduce risk in future geothermal wells. A further objective was to investigate the geological and mechanical drivers of the wellbore's natural deviation from vertical. Accurate temperature evaluation is critical for geothermal projects. True formation temperature, bottomhole temperature (BHT), and geothermal gradient were derived from multi-stage logs using Horner corrections applied to both continuous and static measurements, treating the wellbore as a linear heat source. Adapted borehole imaging workflows were used to delineate lithology, texture, and fracture zones, including a Heterogeneity Index (based on the 70th and 30th resistivity percentiles) and a two-bin volumetric lithology classification using a conductivity-index adaptation of the sand-count method. Dynamic unconfined compressive strength (UCS), brittleness index, and acoustic anisotropy were integrated with the heterogeneity and conductivity indices to differentiate hard intercalations and more homogeneous intervals. Raw temperature measurements, influenced by cooling effect, indicate a geothermal gradient of 2.8°C/100 m within the crystalline basement. After Horner correction, true gradient increases to 3.9°C/100 m with an estimated BHT of 152.3°C at 3000mTVD. These values correspond to a medium to high enthalpy geothermal system and are consistent with the regional geological framework. Depth–inclination crossplot shows a nonlinear wellbore tilt, (38.72° from vertical) segmented into four ramps with gradients of: +0.1789°/m (Zone 1), −0.0254°/m (Zone 2), +0.1458°/m (Zone 3), and +0.0017°/m (Zone 4). Because inflection zones revealed no structural influence on the inclination and lithological changes occur only near the base, macro-lithology seems unlikely to control deviation. The tilt is likely controlled by schistosity: mechanically stronger thin layers alternating with weaker intervals act as miniature whipstocks or guiderails. The borehole's near-orthogonal intersection with rock foliation exhibits vertical transverse isotropy (VTI), confirmed by low acoustic anisotropy (~3.1%), and demands additional caution as vertical and horizontal petrophysical parameters differ significantly. Rock variability is captured through Heterogeneity Index (SORT), reflecting the homogeneity degree within each sequence. SORT Index, brittleness, and UCS exhibit higher values in unfractured quarzitic intercalations, distinguishing them from micaschist. The conductivity index method differentiates conductive-resistive zones, identifying subtle lithological variations and fractures. This work proposes an integrated methodology for feasibility assessment of next-generation closed-loop geothermal systems in foliated metamorphic basement. The approach combines temperature reconstruction, adapted borehole imaging indices, and geomechanical indicators to quantify heterogeneity, identify fracture-prone intervals, and link rock fabric to drilling behavior (including natural deviation). The workflow provides a transferable template for evaluating geothermal potential and anticipating drilling challenges in complex metamorphic settings.

View source

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.