Skip to content

Field Application of 3D MEM to Mitigate Overpressure Hazards and Enhance Well Performance Efficiency

Nov 2026 · ADIPEC · 0 citations · 11 references

Abstract

Exploration focus is moving into the Ultra-Deep resources due to the ever-increasing energy demand of China. Overpressure and wellbore instability related problems in such setting are mainly associated with narrow drilling margin resulting in severe well control incidents and increased drilling cost. In order to reduce drilling risks and operation costs, an accurate geomechanical model is necessary. The model provides technical support for drilling process and minimum reservoir damage due to optimal mud weight program.Well-scale (1D) Mechanical Earth Model (MEM) were constructed on the offset wells which consist of rock strength properties and stress profile by incorporating all available data including open hole log data, geomechanical core lab results, LOT/FIT, direct pore pressure measurements and drilling events. Furthermore, 3D geomechanics model is generated using available well-scale MEM data in the field and distributed throughout the field which guided by seismic interpretation data as distribution control. The 3D geomechanical model was used to design a mud weight and casing program for an upcoming well. The offset wells in the study areas were drilled through complex geological settings including high overpressure and high temperature. Therefore, drilling operations is also risky with different type of drilling events encountered frequently including stuck pipe, inflow, losses and connection gas etc. With 3D geomechanical model as foundation, the integrated approach helps ultra-deep wells to reduce serious wellbore instability caused by abnormal formation pressure, wellbore collapse and other complex drilling problems. The implementation of systematic and holistic workflow has proven to be extremely successful in supporting the drilling of horizontal wells in shale gas reservoir. The integrated solution was applied in the well A1, recorded an improvement in ROP by 45.1% and decrease no-productive time (NPT) by 28.2% compared with an offset well. The geomechanical approach provides a convenient means to assist field engineers in the optimization of mud weight, risk assessment of drilling, and evaluation of horizontal wells drilling performance. The findings will provide reference and guideline for wells in de-risk and improve drilling performance.

View source

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.