Data-Driven Fault Diagnosis in Chemical Reactors Using Takagi–Sugeno Models and Zonotopic PI Observers
Abstract
This paper addresses fault diagnosis in nonlinear systems where reliable mathematical models are unavailable and only input–output measurements are accessible. The proposed methodology consists of three stages. First, a data-driven identification stage is performed using an Adaptive Neuro-Fuzzy Inference System (ANFIS) to capture the nonlinear dynamics of the system from fault-free sensor data. This procedure yields a set of convex Takagi–Sugeno (TS) models representing the system dynamics. In the second stage, fault detection is achieved using zonotopic proportional–integral (PI) observers with convex structures. Robustness against parametric uncertainty and sensor noise is ensured through an H∞ formulation expressed as a set of linear matrix inequalities (LMIs). Finally, fault isolation is carried out using a fault signature matrix (FSM). The zonotopic framework provides adaptive set-based residual bounds that act as adaptive thresholds for fault detection, while structured residual activation patterns enable reliable fault isolation. The proposed approach is evaluated on a continuous stirred tank reactor (CSTR) under sensor faults and incipient process faults in the presence of measurement noise and compared with representative data-driven methods. Results demonstrate improved diagnostic accuracy and reduced false-alarm rates while maintaining timely fault detection and reliable isolation.