Skip to content
Conference Open access

Performance-based optimization of lead rubber earings for potential application in sustainable lightweight bamboo–wood construction

Oct 2026 · IOP Conference Series: Earth and Environment · Vol 1680 · 0 citations · 4 references
Physics

Abstract

This study presents a performance-based optimization of Lead Rubber Bearings (LRBs) for potential application in sustainable lightweight bamboo–wood construction. The investigation focuses on the component-level mechanical response of the LRB rather than the global seismic response of a complete bamboo–wood structural system. An integrated framework combining the Finite Element Method (FEM), Taguchi experimental design, Signal-to-Noise (S/N) ratio analysis, and Analysis of Variance (ANOVA) was employed to evaluate the effects of key design parameters on the mechanical performance of the LRB. The investigated parameters included elastomer-layer thicknesses of 3, 5, and 8 mm, vertical loads of 50, 100, and 150 kN, and prescribed lateral displacements of 16, 32, and 48 mm. The evaluated responses were maximum stress, total deformation, effective stiffness, and energy dissipation. The FEM results indicated nonlinear mechanical behavior, characterized by increased deformation and reduced stiffness under larger lateral displacements, which contributed to enhanced energy dissipation. The Taguchi analysis identified lateral displacement and elastomer-layer thickness as the primary parameters governing the mechanical response of the LRB. The ANOVA results showed that lateral displacement had dominant contributions to deformation (99.948%) and energy dissipation (64.02%), whereas elastomer-layer thickness was the dominant factor affecting stiffness (96.24%). Within the investigated parameter range, vertical load showed comparatively limited influence on the evaluated responses. The low residual error values (<1%) indicated that the selected factors adequately represented the observed response variations. Overall, the results demonstrate that the performance-based selection of elastomer thickness and lateral deformation capacity is essential for balancing flexibility, stiffness, stress demand, and energy dissipation. The findings provide a preliminary component-level design basis for the potential application of optimized LRB systems in sustainable lightweight bamboo–wood construction. However, the global seismic response of a complete bamboo–wood structural system was not evaluated and should be investigated through structural-level nonlinear dynamic analysis in future work.

Read PDF

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.