Skip to content
Conference

Chemical Additives to Reduce CO2 EOR Minimum Miscibility Pressure Requirement

Oct 2026 · SPE Annual Technical Conference and Exhibition · 0 citations · 28 references

Abstract

Minimum miscibility pressure (MMP) is the pressure threshold below which injected CO2 and reservoir crude oil cannot achieve dynamic miscibility, and in many mature or pressure-constrained reservoirs the native MMP exceeds the safe injection or fracture-closure pressure, forcing operators into less efficient immiscible or near-miscible displacement. Chemical additives introduced into the CO2 stream or the water slugs of a water-alternating-gas (WAG) process offer a potential route to lower the effective CO2-oil MMP without requiring higher reservoir pressure. This paper combines a structured synthesis of 20 literature sources (2014–2026) spanning ketones, alcohols, surfactants, dimethyl ether (DME), light alkanes, and related MMP-determination approaches with original vanishing interfacial tension (VIT) experiments quantifying the effect of 3-pentanone, a low-molecular-weight ketone, on CO2-oil interfacial tension (IFT) and estimated MMP. IFT was measured at pressures of 1,000–1,800 psi for base oil and for oil equilibrated with 1, 2, and 5 wt% 3-pentanone solutions. Across the reliable concentrations, IFT decreased systematically with both pressure and additive concentration, and VIT-based MMP extrapolation showed a corresponding reduction from 2,229 psia (base CO2) to 2,127 psia (1 wt%) 2,032 psia (2 wt%), and 1,946 psia (5 wt%), corresponding to a 12.7% MMP reduction at 5 wt% ketone loading. The literature demonstrates that additive-assisted MMP reductions range from modest single-digit values to approximately 36%, depending on additive chemistry, concentration, temperature, fluid composition, and delivery method. A semi-empirical screening correlation is presented to organize the compiled data across concentration, polarity, and temperature. Because published literature data pertain to a diverse set of fluids and MMP methods, our correlation, presented in this paper, should be considered a ranking framework rather than a universal predictive correlation. Furthermore, our experimental measurements and reported literature results suggest the need for further evaluation of ketone-based additives as a practical, infrastructure-friendly, option for use in pressure-constrained CO2 EOR projects.

View source

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.