Skip to content

Integrated one-pot remediation of dioxin-contaminated soils: Process intensification and mechanistic insights.

Nov 2026 · Journal of Hazardous Materials · Vol 518, pp. 144136 · 0 citations · 75 references
Medicine

Abstract

Field-scale remediation of dioxin-contaminated sites conventionally relies on high-temperature thermal technologies requiring secondary incineration above 1000 °C, which entails high energy demand and fugitive emission risks. To address these limitations, we developed a mild-temperature, closed-loop one-pot system integrating solvent washing, in situ sedimentation, UVC photolysis, and solvent recovery. The study comprised two phases: mechanistic evaluation using spiked artificial soil and process validation using field-aged soil with an initial dioxin concentration of 11,776.6 ± 2070.5 pg/g and a toxic equivalency (TEQ) of 537.8 ± 100.9 pg-TEQ/g. In the first phase, methanol-based extraction followed a matrix-controlled mechanism, whereas n-hexane-based extraction was limited by hydrophilic hydration shells surrounding soil particles. To overcome this limitation in the field-aged soil, low-frequency (28 kHz) ultrasound (US)-based process intensification was implemented. At a solid:liquid ratio of 1:10, the integrated process with ultrasonic assistance reduced the final soil TEQ to 131.7 ± 20.4 pg-TEQ/g, below the regulatory threshold of 160 pg-TEQ/g. Under this condition, a subtle toxicity lag was observed, which was likely attributed to the generation of lower-chlorinated toxic intermediates from mass-dominant higher-chlorinated congeners. Collectively, these findings demonstrate that the US-assisted one-pot system offers a promising low-temperature alternative to conventional thermal treatment for field-aged dioxin-contaminated soil.

View source

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.