Measurement and Analysis of Sub-THz Hardware Impairments on 6G Wireless Signal Performance
Abstract
Sub-terahertz communication 100-300 GHz provides the terabits per second throughput that 6G demands, but hardware can cause difficult waveform distortions to suppress or remove. This paper offers the hardware-realistic evaluation using MATLAB 6G library and Hexa-X specifications using the MATLAB 6G Exploration library for pre-6G OFDM and DFTs OFDM waveforms with a 140 GHz carrier frequency, 2.16 GHz bandwidth, and 3.84 kHz subcarrier spacing. Three essential sub-terahertz hardware distortion models are used for each Hexa-X D2.3 impairment, with 140 GHz carrier scaled based on the TI LMX2596 phase noise Phase Noise Model 2, IIR Low-pass Filtering 40 dB stopband attenuation, and GaN PA nonlinearity Memoryless 7th-order polynomial, 6 dB IBO. Also, examined the system performance for 128 TDD timeslots with 9:1 downlink to uplink traffic, 80% occupied. Significant performance characteristics include RMS EVM 3.04% and the achievement of the <5% target, PAPR 9.8 dB using the CCDF, and multiple adjacent ACPRs across channels.