Skip to content
#small language model Open access

A Conflict Is Constructed Before It Is Measured: Seven Design Choices That Set Which Way a Language Model Bends, and Why the Context-Memory Results Do Not Compare

Sep 2026 · Zenodo (CERN European Organization for Nuclear Research)

Abstract

(c) 2026 Pranay Mahendrakar. Licensed under CC BY 4.0. The literature on how language models behave when retrieved context contradicts parametric memory contains a flat contradiction, and neither of its two surveys resolves it. One body of results reports over-reliance on memorised information; another reports that models are highly receptive to conflicting external evidence; a third reports that knowledge updates fail less often than previously published numbers imply. This paper argues that the contradiction is largely not a disagreement about models, because the studies do not share a measurand. A context-memory conflict is not an event that is observed; it is an object the experimenter builds, and seven design choices go into building it: what the conflicting passage is made of, which side is stipulated to be correct and whether the model's belief was elicited or assumed, what quantity is measured, which items are in the sample, what the task demands, what the prompt says, and which model was tested and what was done to it after pretraining. For five of the seven, a single published study varies that choice while holding the others fixed and the reported behaviour moves with it; for the remaining two the evidence is a comparison across studies and is labelled as such. The strongest available adjudication is a 2026 reproducibility study that ran two benchmarks with opposite conclusions under each other's evaluation protocol and attributed the outcome to dataset design, evaluation metric and model size. The reading offered here is narrower than the one the field is converging on. It is not that task demand is the discriminating variable, which one careful study established for one variable while holding others constant, but that the moderators replicate and the point estimates do not: prior confidence, context plausibility, entity frequency and internal inconsistency recur across studies as moderators of context adoption, several of them with a consistent sign, while the adoption rate itself is set by the construction. What follows is that no published number in this literature has been shown to identify a model-level disposition, that a paper reporting only such a number cannot be compared to another, and that the reporting needed to make them comparable is small and is mostly not being done. The literature search, drafting and citation verification for this paper were carried out with AI assistance under the author's direction. Every citation was machine-verified against the arXiv API and Crossref before inclusion, and every quantitative claim was read back against the cited source's own abstract. The author is responsible for the final text and for all claims made in it.

View source

Similar papers

#computer vision Open access Jun 2016

Software Development in Startup Companies: The Greenfield Startup Model

Software startups are newly created companies with no operating history and oriented towards producing cutting-edge products. However, despite the increasing importance of startups in the economy, few scientific studies attempt to address software engineering issues, especially for early-stage startups. If anything, startups need engineering practices of the same level or better than those of larger companies, as their time and resources are more scarce, and one failed project can put them out of business. In this study we aim to improve understanding of the software development strategies employed by startups. We performed this state-of-practice investigation using a grounded theory approach. We packaged the results in the Greenfield Startup Model (GSM), which explains the priority of startups to release the product as quickly as possible. This strategy allows startups to verify product and market fit, and to adjust the product trajectory according to early collected user feedback. The need to shorten time-to-market, by speeding up the development through low-precision engineering activities, is counterbalanced by the need to restructure the product before targeting further growth. The resulting implications of the GSM outline challenges and gaps, pointing out opportunities for future research to develop and validate engineering practices in the startup context.

Carmine Giardino, Nicolò Paternoster, M. Unterkalmsteiner et al. · 179 citations · ⚡14
#computer vision Open access Oct 2016

Software Startups - A Research Agenda

Software startup companies develop innovative, software-intensive products within limited timeframes and with few resources, searching for sustainable and scalable business models. Software startup ...

M. Unterkalmsteiner, P. Abrahamsson, Xiaofeng Wang et al. · 157 citations · ⚡17
#machine learning Review Open access Oct 2016

“Failures” to be celebrated: an analysis of major pivots of software startups

In the context of software startups, project failure is embraced actively and considered crucial to obtain validated learning that can lead to pivots. A pivot is the strategic change of a business concept, product or the different elements of a business model. A better understanding is needed on different types of pivots and different factors that lead to failures and trigger pivots, for software entrepreneurial teams to make better decisions under chaotic and unpredictable environment. Due to the nascent nature of the topic, the existing research and knowledge on the pivots of software startups are very limited. In this study, we aimed at identifying the major types of pivots that software startups make during their startup processes, and highlighting the factors that fail software projects and trigger pivots. To achieve this, we conducted a case survey study based on the secondary data of the major pivots happened in 49 software startups. 10 pivot types and 14 triggering factors were identified. The findings show that customer need pivot is the most common among all pivot types. Together with customer segment pivot, they are common market related pivots. The major product related pivots are zoom-in and technology pivots. Several new pivot types were identified, including market zoom-in, complete and side project pivots. Our study also demonstrates that negative customer reaction and flawed business model are the most common factors that trigger pivots in software startups. Our study extends the research knowledge on software startup pivot types and pivot triggering factors. Meanwhile it provides practical knowledge to software startups, which they can utilize to guide their effective decisions on pivoting.

Sohaib Shahid Bajwa, Xiaofeng Wang, Anh Nguyen-Duc et al. · 127 citations · ⚡15
#computer vision Review Open access May 2015

A survey study on major technical barriers affecting the decision to adopt cloud services

In the context of cloud computing, risks associated with underlying technologies, risks involving service models and outsourcing, and enterprise readiness have been recognized as potential barriers for the adoption. To accelerate cloud adoption, the concrete barriers negatively influencing the adoption decision need to be identified. Our study aims at understanding the impact of technical and security-related barriers on the organizational decision to adopt the cloud. We analyzed data collected through a web survey of 352 individuals working for enterprises consisting of decision makers as well as employees from other levels within an organization. The comparison of adopter and non-adopter sample reveals three potential adoption inhibitor, security, data privacy, and portability. The result from our logistic regression analysis confirms the criticality of the security concern, which results in an up to 26-fold increase in the non-adoption likelihood. Our study underlines the importance of the technical and security perspectives for research investigating the adoption of technology.

Nattakarn Phaphoom, Xiaofeng Wang, S. Samuel et al. · 111 citations · ⚡8
#computer vision Open access Feb 2018

Lean Internal Startups for Software Product Innovation in Large Companies: Enablers and Inhibitors

To compete in this age of disruption, large companies cannot rely on cost efficiency, lead time reduction and quality improvement. They are now looking for ways to innovate like startups. Meanwhile, the awareness and use of the Lean startup approach have grown rapidly amongst the software startup community in recent years. This study investigates how Lean internal startup facilitates software product innovation in large companies and identifies its enablers and inhibitors. A multiple case study approach is followed in the investigation. Two software product innovation projects from two large companies are examined, using a conceptual framework that is based on the method-in-action framework and extended with the previously developed Lean-Internal Corporate Venture model. Seven face-to-face in-depth interviews of the employees with different roles are conducted. Within-case analysis and cross-case comparison are applied to draw the findings from the cases. A generic process flow summarises the common key processes of Lean internal startups. The findings suggest that an internal startup that is initiated management or employees faces different challenges. A list of enablers of applying Lean startup in large companies are identified, including top management support and cross-functional team. Both cases face different inhibitors due to the different process of inception, objective of the team and type of the product. Our contributions are threefold. First, this study is one of the first attempt to investigate the use of Lean startup approach in large companies empirically. Second, the study shows the potential of the method-in-action framework to investigate the Lean startup approach in non-startup context. The third is a general process of Lean internal startup and the evidence of the enablers and inhibitors of implementing it, which are both theory-informed and empirically grounded.

Henry Edison, Nina M. Smørsgård, Xiaofeng Wang et al. · 78 citations · ⚡6
#computer vision Conference Sep 2010

Exploring the Sources of Waste in Kanban Software Development Projects

The application of agile software methods and more recently the integration of Lean practices contribute to the trend of continuous improvement in the software industry. One such area warranting proper empirical evidence is a project’s operational efficiency when using the Kanban method. This short paper takes a new angle and explores waste in the Kanban-driven software development project context. A preliminary research model is presented for helping the consequent replication of the study. The results from the empirical analysis suggest Kanban can be an effective method in visualizing and organizing the current work, but does not prevent waste from creeping in, although the overall project outcome may be successful.

Marko Ikonen, Petri Kettunen, Nilay V. Oza et al. · 67 citations · ⚡9

Related blog posts