This paper considers a discrete-time ISAC waveform design problem that minimizes transmit power from the perspective of a novel metric termed the ambiguity-domain sensing signal-to-interference-plus-noise ratio (AF-SINR).
Abstract
Integrated sensing and communication (ISAC) requires transmit waveforms that simultaneously preserve communication quality, provide reliable sensing, and remain compatible with practical radio-frequency front ends. This paper considers a discrete-time ISAC waveform design problem that minimizes transmit power from the perspective of a novel metric termed the ambiguity-domain sensing signal-to-interference-plus-noise ratio (AF-SINR). The proposed AF-SINR quantifies the ratio between the desired ambiguity-function mainlobe power and the weighted aggregate sidelobe leakage plus noise within a local delay-Doppler region of interest, thereby providing a localized and noise-aware sensing-QoS measure. To enable ISAC operation, the waveform is further required to satisfy per-user effective communication-SINR constraints, while a peak-to-average power ratio (PAPR) constraint is imposed to facilitate practical implementation. The resulting energy-minimization problem is nonconvex due to the fractional QoS expressions, quartic ambiguity terms, and waveform-dependent PAPR constraint. To address this challenge, we propose a fractional-programming successive-convex-approximation (FP-SCA) algorithm. Simulation results verify that the proposed method satisfies all requirements while preserving localized ambiguity suppression over the local delay-Doppler region.
To address the challenges of inter-cell interference/reflection and static clutter, a clutter-aware waveform design for a multi-cell multiple-input multiple-output (MIMO) integrated sensing and communication (ISAC) system is proposed. Various levels of coordination among base stations (BSs) are investigated to enhance...
Yves Fidele Aikoun, Gordon Owusu Boateng, Zhao-Lin Wang et al.· IEEE Transactions on Wireles...· 0 citations
The stringent energy-efficiency requirements of future Integrated Sensing and Communications (ISAC) systems are fundamentally challenged. Unlike conventional communication systems, ISAC transmitters must radiate significantly higher power to ensure reliable target detection, forcing the High-Power Amplifier (HPA) to op...
Eya Gourar, Henrique L. Senger, Gustavo P. Gonçalves et al.· 0 citations
In this paper, we investigate the transmit beamforming design for a general multiple-input multiple-output integrated sensing and communication (MIMO-ISAC) system, where a dual-functional base station (BS) simultaneously communicates with multiple multi-antenna communication users (CUs) and detects the multiple targets...
Kai Yang, Jin Xu, Xiao-Feng Tao et al.· IEEE Transactions on Wireles...· 0 citations
This paper introduces a flexible transceiver beamforming framework for integrated sensing and communications (ISAC) systems. To rigorously quantify the trade-off between sensing and communication (S&C) performance, we propose a unified mean squared error (MSE) evaluation framework building upon practical physical-layer...
Wan-Bin Fu, Yi Zhou, Azzam Al-nahari et al.· 2026 IEEE/CIC International...· 0 citations
Low-altitude wireless networks (LAWNs) require reliable multi-user communication together with accurate range and velocity sensing. Communication and sensing share the same transmit power and spatial degrees of freedom (DoF), and therefore joint beamforming is required to coordinate multi-user spectral efficiency with...
Bing Yang, Yan Huo, Xin Fan et al.· Electronics· 0 citations
This paper investigates joint subcarrier and power allocation for a multi-user Orthogonal Frequency Division Multiplexing (OFDM)-based Integrated Sensing and Communication (ISAC) system in Vehicle-to-Everything (V2X) environments. The goal is to maximize a weighted sum of the capped effective radar Signal-to-Noise Rati...
Jia-Hao Zheng, Xinhao Chen, Lin-Yu Huang et al.· IEEE Transactions on Wireles...· 1 citation
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.