Simultaneously Transmitting and Reflecting Reconfigurable Intelligent Surface–Aided Orthogonal Time Frequency Space System for 6G and Beyond High-Mobility Wireless Networks
Unlike conventional reflection-only reconfigurable intelligent surfaces (RISs), simultaneously transmitting and reflecting RISs (STAR-RISs) constitute a paradigm shift in intelligent surface design by facilitating electromagnetic wave manipulation in both transmission and reflection domains, thereby achieving full-space coverage and mitigating the inherent directional limitations of traditional RIS implementations. Orthogonal time frequency space (OTFS) modulation has emerged as a highly promising waveform candidate for enabling reliable and efficient communication in high-mobility environments, owing to its resilience against severe Doppler effects and time-frequency channel variations. In this paper, a new STAR-RIS aided OTFS system (STAR-RIS-OTFS), which is a promising technique for high-mobility future wireless communication systems, is proposed. The combination of these two methodologies yields enhanced bit error rate performance over conventional OTFS systems. The performance of the proposed STAR-RIS-OTFS scheme is evaluated under M-ary quadrature amplitude modulation over both Rayleigh and Nakagami-m fading channels. In addition, a detailed computational complexity analysis is carried out for the maximum likelihood detector and the enhanced low-complexity detector, considering both the proposed STAR-RIS-OTFS architecture and the benchmark system. Moreover, the effects of imperfect channel state information (CSI) on the proposed STAR-RIS-OTFS system are investigated, and comparative performance results are provided under perfect and imperfect CSI assumptions. The proposed STAR-RIS-OTFS system is evaluated through Monte Carlo simulations over high-mobility Rayleigh channels for various system parameters. It is shown that the proposed STAR-RIS-OTFS scheme outperforms the traditional OTFS technique.
Simulation results show that the proposed method can significantly improve the sum rate of users as compared to benchmark with FPA + Optimized STAR-RIS, 6DMA + Random STAR-RIS, and FPA + Random STAR-RIS.
Yuewei Wu, Ming-Hao Chen, Jing-Jing Yang et al.· IEEE Open Journal of the Com...· 0 citations
Simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RISs) extend conventional reflecting-only surfaces by enabling controllable full-space propagation. Yet, once deployed, the physical locations of their elements remain fixed, leaving the surface geometry unable to adapt to users, sensi...
High spectral efficiency and wide coverage enhancements for future wireless networks are offered by reconfigurable intelligent surfaces (RIS) and faster-than-Nyquist (FTN) signaling. However, severe challenges are faced in practical deployments from RIS hardware impairments and aggressive FTN-induced inter-symbol inter...
Chao-Rong Zhang, B. Ng, Ke Wang et al.· IEEE International Symposium...· 0 citations
Reconfigurable intelligent surfaces (RISs) make the wireless propagation environment programmable, while simultaneously transmitting and reflecting RISs (STAR-RISs) extend this capability to users located on both sides of a surface. However, conventional STAR-RIS architectures retain a fixed physical geometry after dep...
Intelligent reflecting surfaces (IRSs), also termed reconfigurable intelligent surfaces (RISs), have been investigated as a low-power approach for shaping wireless propagation and improving coverage and reliability in fifth-generation (5G) and emerging sixth-generation (6G) networks. In this review, the motivation and...
Dilkhaz T. Sadeeq, Faris Keti· European Journal of Applied...· 0 citations