Effects of Deformation and Annealing on the Microstructure and Properties of Cr12Fe51Ni12Mn25 Medium-Entropy Alloy

Evolution of microstructure and mechanical properties during annealing of rolled CoFeMnNi-5Cr-5Al-1C alloy

The evolution of microstructure and mechanical properties during annealing has been studied in a 90% rolled CoFeMnNi-5Cr-5Al-1C multi-principal element alloy. The rolled microstructure is observed to be strongly heterogeneous, comprising twinned regions and shear bands, layers of mixed orientations with high frequencie...

Effect of heat treatment on the microstructure and mechanical properties of TC4 titanium alloy

The effects of solution treatment (920∼1080°C) and aging treatment (600∼820°C) on the microstructure and tensile properties of a hot-rolled TC4 titanium alloy were investigated. Increasing solution temperature transforms the microstructure from bimodal to Widmanstädter structure, with equiaxed α area fraction decreasin...

Effects of Aging Treatment on the Microstructure and Mechanical Properties of Ti–5Cu Alloy

Effects of Mn addition on the plastic deformation mechanisms and thermal conductivities of high-pressure die-cast Mg alloys with ultrahigh Zn contents

Effect of annealing on the microstructure and properties of selective laser melted Al₁.₈CrCuFeNi₂ high-entropy alloy

Analyzing the Effect of Fe on the Microstructure and Mechanical Properties of a Fibrous AA6110 Alloy

In this study, the effect of three different levels of iron impurity on the grain structure and texture of a fibrous AA6110 alloy after hot extrusion was investigated. Microstructural examination was carried out to measure the microtexture and the results were correlated with tensile and bending mechanical properties...