Bisphenol A is a widespread endocrine-disrupting contaminant frequently detected in aquatic environments, creating a need for rapid and reliable methods for water quality monitoring. Here we show that a solid-phase-synthesized nanomolecularly imprinted polymer (nanoMIP) can be integrated into a surface plasmon resonance (SPR) platform for selective, label-free detection of bisphenol A in water. The nanoMIPs exhibited uniform spherical morphology with an average hydrodynamic diameter of 94 nm, enabling homogeneous immobilization on gold SPR chips. Real-time measurements showed concentration-dependent binding over the 5–800 nM range with a detection limit of 1.46 nM. The sensor exhibited heterogeneous binding behavior, strong discrimination against structurally related bisphenols, and high imprinting efficiency compared with control nanoMIPs. Validation against liquid chromatography–mass spectrometry yielded recoveries of 96.90–98.93%. Analysis of commercial carboy waters revealed detectable bisphenol A and temperature-dependent migration. These findings demonstrate that the nanoMIP–SPR platform provides a rapid, reusable, and amplification-free strategy for sensitive monitoring of bisphenol A in aqueous environments.
This work developed a non-enzymatic MIP electrochemical sensor based on an AuNPs/PB/CNT composite that exhibited an ultra-wide linear range from 10 pM to 200 µM and a detection limit of 0.37 pM and showed good agreement with commercial assays in real-sample analysis and excellent selectivity in the presence of common i...
Per- and polyfluoroalkyl substances (PFAS) are persistent synthetic fluorinated contaminants that require rapid, sensitive, and field-deployable analytical technologies beyond conventional laboratory-based mass spectrometry. Here, we report a nanoMIP-metal-phenolic network (MPN) electrochemical sensing platform for hig...
P. Lasserre, Nozomi Matsudaira, Tobias Hrovat et al.· Biosensors & bioelectronics· 0 citations
Molecularly imprinted polymers have emerged as robust synthetic recognition materials for selective detection of disease biomarkers and environmental contaminants owing to their high physicochemical stability, low production cost and tunable binding site architecture. Compared with biological receptors, MIPs provide du...
Thurgah Elang Gopalan, Santheraleka Ramanathan, S. B. Gopinath et al.· Critical reviews in analytic...· 0 citations
Accurately detecting chloramphenicol (CAP) residues in animal-derived foods remains challenging primarily due to severe electrode biofouling. Inspired by shark skin's antifouling properties, a biomimetic antifouling peptide (FUZP) was designed by covalently grafting a perfluorocarboxylic acid moiety onto a U-shaped zwi...
Ya-Xuan Zuo, Lu-Yu Sun, Yue-Ru Li et al.· Food Chemistry· 0 citations
The typical off-flavor compound 2-methylisoborneol (2-MIB) is widely present in water bodies which induces unpleasant odors in water even at extremely low concentrations. It is urgent to develop a simplified laboratory-based electrochemical screening workflow for trace 2-MIB quantification since the traditional detecti...
Hao-Wen Hong, Jun Wu, Jian Lu· In Analysis· 0 citations
The presence of lincomycin (LIN) residues in animal-derived foods presents a potential threat to human health. A sensitive photoelectrochemical (PEC) sensor was developed for LIN detection using a water bamboo cellulose-supported copper oxide (CuO@WBC) composite as photoactive substrate. CuO particles with visible-ligh...
Wen-Qing Zhang, Si-Tong Huang, Jia Sun et al.· Food Chemistry· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.