Skip to content
Open access

Experimental Verification of Cruise Efficiency Enhancement for a Lift-Wing UAV with an Independently Controlled Tail-Mounted Pusher

Oct 2026 · Drones · 0 citations

Abstract

Multi-rotor UAVs suffer from a sharp decline in rotor efficiency during high-speed cruise, severely limiting their endurance. To address this issue, this paper proposes a vertical takeoff and landing configuration that integrates a lift wing with an independent tail-mounted pusher. The wing lift unloads the vertical rotor load, while the pusher thrust offsets part of the horizontal drag, thereby enabling both vertical takeoff and landing and efficient cruise. A longitudinal trim model is established to theoretically compare the thrust and power characteristics of three configurations. A modular validation platform capable of switching among three propulsion configurations is built, and an independent closed-loop pusher-thrust controller is implemented on an auxiliary computer without modifying the flight controller firmware. Comparative flight experiments are conducted along the same route under equal total mass conditions. The results show that the energy consumption per unit distance during cruise of the complete configuration is reduced by approximately 58% compared with the pure multi-rotor. Compared with the wing-only configuration without tail propulsion, the cruise speed is increased by approximately 27%, while the energy consumption per unit distance is reduced by approximately 19% at their respective natural cruise speeds. Speed fluctuations and attitude disturbances remain within acceptable ranges. By increasing the pusher thrust, the cruise speed can be extended to 25 m/s, breaking through the speed bottleneck of the no-tail-propulsion configuration; this upper limit is constrained by the thrust capability of the current tail-mounted pusher and propeller. These findings confirm the effectiveness of the synergistic mechanism of lift-unloading and thrust-sharing, demonstrate that independent pusher-thrust control is the key technology for achieving this performance advantage, and provide an experimental basis and an engineering solution for the design of lightweight, high-efficiency VTOL UAVs.

Read PDF

Similar papers

Open access Oct 2026

Aerodynamic Performance of a Hand-Launched Biplane UAV with Distributed Electric Propulsion

Hand-launched unmanned aerial vehicles require adequate low-speed lift and cruise efficiency. This study investigates a 3 kg propeller-aided biplane (PAB) with distributed electric propulsion using unsteady computational fluid dynamics. Propeller–wing arrangements are examined, followed by complete-aircraft simulations...

Yu Bai, Zhou Zhou, Ke-Lei Wang · 0 citations
Conference Open access Sep 2026

Cruise aerodynamic performance of a strake-wing tail-sitter UAV

A tail-sitter vertical take-off and landing unmanned aerial vehicle (UAV) for low-altitude interception requires vertical launch capability together with efficient fixed-wing cruise. This study assesses the cruise aerodynamic feasibility of a 30 kg strake-wing concept using three-dimensional steady Reynolds-averaged Na...

Jing-Ming Xiao, Zhi-Yu Wu, Hong-Wei He et al. · 0 citations

Design and CFD Simulation Analysis of Cross-Medium Aircraft

Composite wing trans-medium aircraft integrate the high-speed cruise efficiency of fixed-wing aircraft with the vertical take-off and landing (VTOL) flexibility of rotary-wing aircraft, boasting significant application potential in marine environmental monitoring and other fields. This paper designs a trans-medium vari...

Ya-Jun Hu, Liao Zhou, Ming-Ming Guo et al. · 0 citations
Sep 2026

Wind Tunnel Tests of Dynamically Scaled Lift- and Thrust-Compounded Helicopter Configurations

This paper presents a high-speed wind tunnel investigation of compound helicopter aeromechanics, focusing on the effects of various lift and thrust compounding strategies. Six rotorcraft configurations, incorporating various combinations of wings and a pusher propeller, were tested at advance ratios up to 0.7. The comp...

Vivek Uppoor, Inderjit Chopra · 0 citations
Conference Open access 2026

Physical analysis of forces, moments, and energy efficiency of multirotor unmanned aerial vehicles from the perspective of flight control

Multirotor unmanned aerial vehicles (UAVs) form a specific class of aircraft in which lift is generated directly by rotor thrust rather than by fixed wings. This principle enables vertical take-off and landing, hovering and precise low-speed positioning, but it also increases energy demand and makes the flight dynamics...

D. Živanić, Vladimir Žerajić, Nikola Ilanković · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.