Design and Experimental Study of a Semi-Active Boom Vibration Damping System for a Shielded Soybean-Maize Sprayer

Abstract

For the problem that, under the soybean-maize strip intercropping pattern, the installation of anti-drift shields changes the mass and inertia characteristics of the boom of a shielded sprayer, making it prone to severe vibration under complex field excitations and thereby affecting application uniformity and operational safety, a semi-active boom vibration damping system based on a magnetorheological damper was designed and tested. First, an equivalent mechanical model of the boom considering added mass and stiffness variation was established, and the characteristics of excitation sources such as road spectra and start-stop impacts were clarified. Second, based on the Bouc–Wen model, the magnetorheological damper was selected and its output force boundaries were designed. The stroke was determined to be 80–110 mm, and the maximum damping forces in the compression and rebound strokes were 1.15 kN and 3.44 kN, respectively. Furthermore, a semi-active vibration damping system with an LK3U-14MT PLC as the core controller was developed. Finally, simulation analysis, free-vibration decay tests, obstacle-crossing tests, and field operation tests were conducted to verify the vibration damping performance of the developed semi-active system. The field test results showed that, at typical operating speeds of 3–5 km/h, the semi-active vibration damping system reduced the maximum vertical amplitude at the boom tip by 28.6–43.1% and the maximum inclination angle by 12.2–55.6%, effectively improving the attitude stability and roll resistance of the boom of the shielded sprayer.