Oct 2026· Journal of Manufacturing and Materials Processing· 0 citations· 45 references
Abstract
The increasing use of multi-material automotive structures has intensified the demand for reliable joining technologies capable of integrating lightweight aluminum alloys with ultra-high-strength steels. This study investigated the formation mechanisms, geometrical characteristics, mechanical performance, and interfacial behavior of dissimilar AA5182 aluminum alloy and 22MnB5 press-hardened steel joints produced by clinching. Cross-sectional metallography, mechanical testing, scanning electron microscopy (SEM), and energy-dispersive spectroscopy (EDS) were employed for characterization. The analyzed joint cross-section exhibited well-developed mechanical interlocking, with left and right interlock lengths of 0.175 and 0.191 mm, respectively. Severe localized deformation during clinching produced thickness reductions of approximately 75% in AA5182 and 67% in 22MnB5. Mechanical testing showed a higher peak load under lap-shear loading (1210 ± 130 N) than under cross-tension loading (900 ± 40 N). SEM observations revealed extensive interfacial contact without major discontinuities, while EDS indicated localized redistribution of Al, Fe, and Si associated with deformation of the Al–Si-coated interface. No clear evidence of diffusion-controlled metallurgical bonding was identified. The results indicate that joint integrity was governed primarily by mechanical interlocking, with interfacial friction considered a possible secondary contribution to load transfer, demonstrating the technical feasibility of clinching for AA5182–22MnB5 multi-material structures.
Hybrid materials combining aluminum alloys with polymers are crucial for lightweight, durable, and multifunctionalcomponents in automotive and aerospace industries, enhancing performance and cost efficiency. In this study,AluminumMagnesiumSilicon alloy (AA6082) was joined to Polybutylene Terephthalate (PBT) using hot p...
Dufera Bulto Gonfa, D. Sinha, Shimelis Lemma Beshahwured et al.· International Journal of Mar...· 0 citations
Hybrid lightweight structures increasingly combine cast, wrought, and additively manufactured aluminum alloys, but the mechanical response of their welded joints remains strongly material-dependent. In this study, cast EN AC-42100-T6, wrought EN AW-6082-T6, and laser powder bed fusion (LPBF) AlSi10Mg stress-relieved pl...
Omar Bologna, S. Cecchel, Riccardo Ferraresi et al.· Metals· 1 citation
Dissimilar aluminium alloys are widely used in automotive and aerospace structures because they are lightweight and strong. However, joining these alloys by fusion welding remains challenging because their different chemical compositions and thermal behaviour strongly affect weld quality. This study investigates how jo...
Okoubulu Augustine B., Ajao Akeem M., Nwaeju-Okechukwu Cynthia C. et al.· European Journal of Material...· 0 citations