Skip to content
Open access

EFFECT OF STIR-CAST PROCESS PARAMETERS ON THE DEVELOPMENT OF BIO-ASH REINFORCED ALUMINUM MATRIX COMPOSITES FOR AUTOMOTIVE APPLICATIONS

Oct 2026 · Nipes journal of Energy Technology and Environment · 0 citations

Abstract

The development of sustainable lightweight materials with improved mechanical performance has become a major priority in the automotive industry due to increasing demands for enhanced fuel efficiency, reduced emissions, and improved component durability. This study optimized the stir-casting process for the development of hybrid bio-ash reinforced AA6061 aluminium matrix composites using coconut shell ash (CSA) and periwinkle shell ash (PSA) for automotive wheel-rim applications. A Taguchi Design of Experiments (DOE) coupled with Signal-to-Noise (S/N) ratio analysis and Analysis of Variance (ANOVA) was employed to determine the optimum reinforcement composition and processing parameters. Five reinforcement compositions containing 0, 3, 6, 9, and 12 wt% total bio-ash reinforcement were produced through stir casting, while stirring speed (300, 400, and 500 rpm), stirring time (5, 10, and 15 min), and pouring temperature (680, 700, and 720°C) were systematically investigated. The developed composites were evaluated based on tensile strength, hardness, fatigue behaviour, wear resistance, porosity, and overall process stability. The optimization results showed that the optimum reinforcement composition was 6 wt% total hybrid reinforcement (3 wt% CSA and 3 wt% PSA), which produced the highest mean Signal-to-Noise ratio of 43.95 dB. The optimum stir-casting parameters were identified as 400 rpm stirring speed, 10 min stirring time, and 700°C pouring temperature, corresponding to S/N ratios of 43.90 dB, 43.85 dB, and 43.95 dB, respectively. These optimum conditions promoted improved particle dispersion, enhanced matrix–reinforcement bonding, reduced porosity, and greater process stability compared with other parameter combinations. Reinforcement contents above 6 wt% resulted in reduced performance due to particle agglomeration, increased porosity, and poor wettability. The study demonstrates that hybrid reinforcement using coconut shell ash and periwinkle shell ash, combined with statistically optimized stir-casting parameters, provides an effective and environmentally sustainable approach for producing high-performance aluminium matrix composites. The developed optimization framework offers a reproducible manufacturing route for lightweight automotive components and supports the utilization of agricultural and marine wastes as value-added engineering reinforcements. These findings contribute to sustainable materials development and provide practical processing guidelines for the industrial production of bio-ash reinforced aluminium matrix composites for automotive applications.  

Read PDF

Similar papers

Oct 2026

Investigations of the Tribological Properties of Marine-Derived Biowaste Based Reinforcements of Aluminum Composite Prepared By Ultrasonic Assisted Stir Casting Process

Developing high-performance, lightweight Aluminium based composites is essential for cutting-edge structural applications, especially in the aerospace and automotive industries. The AA7075-based composites are produced with reinforcement particles of Yttrium Oxide (Y2O3) and seashell powder individually and combined wi...

D. Rani, N. Yuvaraj, Vipin · 0 citations
Oct 2026

Hybrid Waste SAC-DPF Ash Reinforced Aluminium Composites: Linking Processing, Structure and Performance

The development of sustainable aluminium matrix composites using waste-derived reinforcements requires carefulcontrol of manufacturing processes to achieve reliable performance. In this work, high-strength green aluminium matrix composites reinforced with waste SAC-DPF ash were fabricated via a controlled stir casting...

Shailendra Kumar Verma, P. Chauhan, Jayant Raj et al. · 0 citations
Open access Oct 2026

Effect of Heat treatment parameters on the tribological performance of LM26/graphite/fly ash hybrid aluminium matrix composites using Taguchi-TOPSIS optimization

Hybrid aluminium matrix composites (HAMMCs) are of interest for lightweight components requiring improved resistance to wear and friction. The present study investigates the effects of solution treatment temperature, holding time and cooling method on the tribological behaviour of stir-cast LM26/graphite/fly ash hybrid...

Prakash Chellamuthu, Palanisamy Angappan, P. Duraisamy et al. · 0 citations
Open access Oct 2026

Evaluation of Tribological Performance for Aluminium Metal Matrix Composites: Entropy-VIKOR MCDM Approach

Aluminium Hybrid Metal Matrix Composites (AHMMCs) are increasingly used in aerospace, automotive, and marine applications because of their superior mechanical and tribological properties. This study investigates Al6061-based hybrid composites reinforced with equal proportions of SiC and Al₂O₃, with the total reinforcem...

S. K, Padmanabham M · 0 citations
Oct 2026

Effect of Reinforcement Weight Fraction on the Mechanical and Tribological Performance of AA7075-T6 Based Metal Matrix Composites for Marine Bearing Applications

In this study, the mechanical and tribological performance of Aluminum 7075-T6 based composited reinforced withTitanium Diboride and Silicon Carbide has been investigated with relevance to marine applications. The composites were fabricated with TiB₂ content from 1 to 9 wt.% and SiC from 9 to 1 wt.%, respectively. Mech...

T. K. Gupta, A. Kumar, P. Pachauri et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.