Skip to content

Hybrid Waste SAC-DPF Ash Reinforced Aluminium Composites: Linking Processing, Structure and Performance

Oct 2026 · International Journal of Maritime Engineering · Vol 168, pp. 205-216 · 0 citations

Abstract

The development of sustainable aluminium matrix composites using waste-derived reinforcements requires carefulcontrol of manufacturing processes to achieve reliable performance. In this work, high-strength green aluminium matrix composites reinforced with waste SAC-DPF ash were fabricated via a controlled stir casting route, and the resulting process-property correlations were systematically examined. The influence of processing parameters on reinforcement distribution, densification, and interfacial integrity was evaluated through microstructural characterization. Improved dispersion of ash particles and reduced casting-related defects were observed under optimized processing conditions, which directly influenced the mechanical response of the composites. Enhanced hardness and tensile strength were primarily attributed to improved particle–matrix interaction and reduced porosity arising from effective process control. Tribological investigations revealed improved wear resistance and modified frictional behavior, associated with the presence of hard ash particles and the formation of a stable load-bearing surface during sliding. The results demonstrate that appropriate manufacturing control plays a decisive role in governing the properties of waste-reinforced aluminium composites. This study establishes a clear process–property correlation, confirming the feasibility of utilizing waste SAC-DPF ash as an effective reinforcement for producing sustainable aluminium matrix composites suitable for engineering applications.

View source

Similar papers

Open access Oct 2026

Physicochemical and Mechanical Characterization of PLA Composites With Waste‐Derived Reinforcements for 3D ‐Printed Applications

This study focuses on developing sustainable polylactic acid (PLA)‐based composites reinforced with recyclable fillers, such as sawdust, medium‐density fibreboard (MDF), and textile waste, for advanced 3D printing applications. Following circular economy principles, this study looks to enhance the mechanical, structu...

Adriana Popa, G. Ispas, Victor Dan Baias et al. · 0 citations
Oct 2026

Performance evaluation of fibre-reinforced geopolymer concrete incorporating recycled coarse aggregate under elevated temperatures

The use of industrial by-products and recycled materials in geopolymer concrete has gained momentum due to its growing demand for sustainable and fire-resistant construction materials. However, the use of Recycled Coarse Aggregate (RCA) is often associated with lower mechanical and durability performance as a result of...

R. Abiraami, R. B. · 0 citations
Review Open access Nov 2026

Waste-derived aluminosilicate reinforcements in copper matrix composites for tribological applications: a critical review and future perspectives

Copper matrix composites (CMCs) have attracted considerable attention for advanced tribological materials. They combine copper’s excellent thermal and electrical conductivity with enhanced mechanical and wear performance from the reinforcing phase. Copper’s relatively low hardness and poor wear resistance limit its app...

Sehinde Happiness Saheyi, S. Seidu · 0 citations
Oct 2026

Investigations of the Tribological Properties of Marine-Derived Biowaste Based Reinforcements of Aluminum Composite Prepared By Ultrasonic Assisted Stir Casting Process

Developing high-performance, lightweight Aluminium based composites is essential for cutting-edge structural applications, especially in the aerospace and automotive industries. The AA7075-based composites are produced with reinforcement particles of Yttrium Oxide (Y2O3) and seashell powder individually and combined wi...

D. Rani, N. Yuvaraj, Vipin · 0 citations
Open access Oct 2026

EFFECT OF STIR-CAST PROCESS PARAMETERS ON THE DEVELOPMENT OF BIO-ASH REINFORCED ALUMINUM MATRIX COMPOSITES FOR AUTOMOTIVE APPLICATIONS

The development of sustainable lightweight materials with improved mechanical performance has become a major priority in the automotive industry due to increasing demands for enhanced fuel efficiency, reduced emissions, and improved component durability. This study optimized the stir-casting process for the development...

Franklin Okeoma, T. F. Kadurumba, H. Ugwu · 0 citations
Open access Oct 2026

Microstructure-Guided Optimization of Steel Fiber-Reinforced Crumb Rubber Concrete for Sustainable and Lean Construction

The development of sustainable concrete materials using recycled waste resources has gained significant attention in construction engineering. The crumb rubber obtained from end-of-life tires provides an effective approach for waste-tire utilization; however, its incorporation into concrete often reduces mechanical per...

Chandrikka Vinayakarao, Shoba Rajkumar David, V. Gunasekaran et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.