In this study, the high-velocity impact response of an elastomeric fiber-metal laminate (EFML) comprising aluminum, glass/epoxy, and a natural-rubber elastomer reinforced with nano-alumina was investigated. Ten nano-alumina contents (0, 0.5, 1, 2, 3.5, 5, 10, 15, 20, and 25 wt.%) were considered to evaluate their influence on the dynamic response. Split Hopkinson pressure bar (SHPB) tests were used to identify concentration-specific hyperelastic coefficients, and gas-gun tests on the alumina-free laminate were used to validate the numerical impact model. The elastomer was represented in LS-DYNA using Mooney-Rivlin, Neo-Hookean, and Blatz-Ko models, with parameters fitted to the SHPB data. The simulations agreed satisfactorily with the measured residual velocity and observed damage modes of the alumina-free laminate. The validated model then predicted the response of the nano-alumina-containing laminates. The numerical results indicated lower residual velocity and greater energy absorption at 1, 10, and 15 wt.% nano-alumina; these formulation-dependent trends are numerical predictions because corresponding high-velocity impact tests were not performed for the filled laminates. Increasing nano-alumina content also modified load transfer to the distal composite and aluminum layers and increased their displacement. These results clarify the predicted influence of nano-alumina content on the impact response of the investigated EFML.
A finite element model for the low-velocity impact of carbon fiber reinforced polymer (CFRP) square tubes was established using ABAQUS. The 3D-Hashin failure criterion and cohesive contact behavior were adopted to simulate interlaminar damage. The reliability of the model was verified by comparison with experimental re...
Hao-Jiong Lin, Xian-Liang Zeng, Yi Zhong et al.· International Conference on...· 0 citations
Fiber–metal laminates (FMLs) are hybrid structures manufactured using alternating layers of aluminium alloy and epoxy-reinforced E-glass fabric, with the stacking sequence [Al/Glass/Al/Glass/Al], offering high specific strength, fatigue resistance, and damage tolerance. However, structural cutouts generate stress conce...
M. Abdellah, O. Irfan, H. Omar· Polymers· 0 citations
Rubber materials are widely used in the automotive industry due to their shock-absorbing properties, which are also utilized in steering systems to avoid high-rate compression loads at end-of-travel positions. This study presents a finite element analysis of a steel-rubber automotive endstop damper, with particular att...
T. Varga, Bálint Fazekas, T. Mankovits· Discover Mechanical Engineer...· 0 citations
The study provides a critical comparison of micromechanically based methods, Classical Laminate Theory (CLT), and experimental validation for the prediction of mechanical properties of composite laminates. A symmetric and balanced ±37° glass fiber-reinforced polymer (GFRP) laminate was manufactured via the vacuum infus...
Muhsin Aljuboury, Amjed Ahmed Jasim· Stiffness Behaviour of GFRP...· 0 citations
Continuous alumina fiber-reinforced aluminum matrix composites (Al2O3f/Al) were investigated using an RVE-based finite element framework to clarify mesoscopic failure mechanisms under tensile and bending loads. An RVE with 60 vol.% fibers in a periodic diagonal-square arrangement was constructed. Interfacial debonding...
De-Sheng Chu, Chen-Qi Nan, Qing-Jun Peng et al.· Journal of Physics, Conferen...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.