Oct 2026· Bioresource Technology· Vol 465, pp.
136155
· 0 citations· 55 references
Medicine
Abstract
Extracellular electron transfer (EET) across the biofilm-anode interface governs current generation and electron recovery in microbial fuel cells (MFCs). Although engineering the electronic structure of bioanodes offers a promising strategy for accelerating EET, the contribution of electrode spin states remains poorly understood. Here, oxygen-vacancy-rich, spin-polarized Fe-Ti anodes (SP-Fe-Ti) and vacancy-suppressed, spin-depressed controls (SD-Fe-Ti) were prepared and then compared to determine how their distinct electronic structures influenced electroactive biofilm development and interfacial electron transfer during 73 d of MFC operation. Our results showed that SP-Fe-Ti increased the full-period mean current density and the stable-period mean current density. The cumulative charge density of SP-Fe-Ti increased from 2780.7 ± 600.0 to 5163.2 ± 459.2 kC m-2, 1.86 to 4.5-fold higher than that of SD-Fe-Ti. Voltammetric and impedance analyses revealed SP-Fe-Ti had a stronger turnover, non-turnover, and EPS-associated redox responses for SD-Fe-Ti, together with a lower fitted interfacial resistance. The spin-active interface of SP-Fe-Ti also promoted biofilm development, increasing the attached protein content by 3.30-fold, selectively enriching bound extracellular polymeric substances (EPS), and decreasing the membrane-compromised cell fraction from 63.29 ± 5.26 % to 26.49 ± 1.67 %. More importantly, SP-Fe-Ti-derived EPS exhibited a normal apparent kinetic isotope effect, KIE(H/D), of 2.94, whereas SD-Fe-Ti-derived EPS showed a pronounced inverse response of 0.050, indicating potentially distinct protonation- and hydrogen-bond-dependent redox environments. Collectively, these findings highlight spin‑electronic engineering as a promising avenue for tuning microbe‑electrode interactions and improving microbial bioelectrochemical energy conversion.
Electroactive biofilm (EAB) organization and extracellular electron transfer (EET) govern moving-bed biofilm reactor-microbial fuel cell (MBBR-MFC) performance, yet the coupled effects of bio-carrier type and filling ratio remain unclear. We compared bioceramic, biochar, polyurethane sponge, and conductive sponge, and...
Si Zhai, Xiao-Li Yang, Xin-Yi Xiang et al.· Bioresource Technology· 0 citations
Highlights Cobalt-free SrFe1−xCexO3−δ (x = 0, 0.05, 0.10, 0.15 and 0.20) cathodes were systematically developed for IT-SOFCs. Ce substitution effectively tuned crystal structure, defect chemistry, and Fe redox states. SFCO-3 exhibited the optimum balance of conductivity and electrochemical activity. Ce-driven defect en...
Packiaraj Rajagopal, M. Rajasekaran, Sivaganesh Dhanushkodi et al.· Materials· 0 citations
Cathodic electroactivation of peroxydisulfate (PDS) provides a sustainable pathway for treating emerging contaminants, yet the rational design of cathode interfaces to maximize electric field synergy remains a critical challenge. Herein, this study prepared a modified carbon felt cathode with defective D-MIL-88B(Fe) (D...
Guan-Yu Liu, Xue-Ying Ren, Wen-Qin You et al.· Environmental Science and Te...· 0 citations
Single-phase transition metal nitrides (TMNs) for alkaline hydrogen evolution reaction (HER) are limited by sluggish charge transfer kinetics, suboptimal adsorption, and restricted accessibility of active sites—intrinsic drawbacks of their electronic structure and conventional electrode architecture. Herein, we circu...
Wu-Bin Wan, Xue-Jing Yang, Tian-Guo Wang et al.· ACS Sustainable Chemistry &a...· 1 citation
The sluggish kinetics of the anodic oxygen evolution reaction (OER) severely limit the energy efficiency of conventional water electrolysis. Replacing OER with thermodynamically favorable small-molecule oxidation offers a promising strategy to reduce energy consumption while enabling value-added chemical production. He...
Si-Wei Cheng, Jun-Li Wang, Xian-Cai Yu et al.· Journal of Colloid and Inter...· 0 citations
Microbial electrochemical systems (MESs) present a promising approach for simultaneous water treatment and electricity generation. However, their performance is constrained by limited chemical-to-electrical energy conversion efficiency. Anode materials are central to this conversion process. Here, a self-supporting dua...
Yu-Jie Zhu, Yuan-Yuan Li, Ning Wang et al.· ACS Applied Materials and In...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.