Oct 2026· Applied Sciences· 0 citations· 6 references
TL;DR
MSR-SLAM is presented, a multi-stage map-refinement framework built on an existing LiDAR–inertial odometry front end that rejects constraints whose candidate-induced translational or rotational correction exceeds preset limits before they can affect the active pose graph.
Abstract
LiDAR–inertial odometry can remain locally accurate while accumulating unbounded global drift, and in structurally repetitive GPS-denied environments, the loop closures intended to remove that drift may instead corrupt the map. This paper presents MSR-SLAM, a multi-stage map-refinement framework built on an existing LiDAR–inertial odometry front end. Loop candidates retrieved by a learned place-recognition descriptor are verified geometrically. In the offline batch configuration, geometrically verified loop constraints are incorporated into pose graph optimization after the complete sequence is available. In the online configuration, geometrically verified candidates pass through an additional admission stage that rejects constraints whose candidate-induced translational or rotational correction exceeds preset limits before they can affect the active pose graph. The global map is subsequently reconstructed from the optimized poses. The main real-robot evaluation comprised seven offline/online processing cases derived from five distinct recorded traversals in indoor, outdoor, and subterranean environments, using a Unitree Go2 quadruped carrying a 16-beam LiDAR. Additional live traversals were used separately for the online consistency analysis. In one online sequence, 14 of the 15 geometrically verified candidates were rejected at the admission stage; in a loop-free tunnel, all 310 retrieved candidates were rejected during geometric verification, and the trajectory was left unmodified. The offline failure case E4 combined excellent registration quality and large residual reduction with severe global distortion and no loop edge spanning 500 or more node indices, highlighting the need to assess loop-edge coverage alongside local fit. Three independent traversals of one environment produced geometric acceptance rates between 10.8% and 11.2%, with exactly one loop constraint admitted in each traversal. On KITTI Sequence 00, MSR-SLAM reduced the RKO-LIO ATE RMSE from 9.5525 m to 4.9322 m (48.4%) while leaving the short-term RPE essentially unchanged.
A unified LiDAR–IMU fusion framework that tightly couples motion compensation, multimodal global descriptors, adaptive loop-closure validation and factor-graph optimization is introduced, offering a high-precision SLAM solution suitable for long-duration operations and robotics applications requiring reliable localizat...
Sen Li, Ji-Hao Xu, He Guan et al.· Sensor Review· 0 citations
Overall, the results demonstrate a tunnel-specific, graph-efficient backend that improves native-output global trajectory agreement, substantially reduces graph redundancy, and maintains competitive density-controlled trajectory consistency on the evaluated underground route.
Wheeled inspection robots without satellite navigation must estimate their pose from onboard sensors whose reliability varies along the route. Three limitations of current practice are addressed. A single registration strategy cannot cover the alternating motion patterns of an inspection task; fixed fusion weights cann...
Shao-Feng Han, Bo-Han Zang, Kang Li et al.· IEEE Sensors Journal· 0 citations
This study aims to develop a practical LiDAR–inertial Simultaneous Localization and Mapping (SLAM) system for industrial mobile robots operating in dynamic, repetitive and resource-constrained warehouse environments by formulating dynamic-object handling as a continuous uncertainty-propagation process spanning front-en...
Lin-Kui Wu, Rui-Han Bai, Yi-Xuan Du et al.· Industrial robot· 0 citations
The results demonstrate that an ordinary globally localized ground vehicle can provide useful metric drift correction for monocular UAV vSLAM without artificial markers, UWB ranging, or additional onboard UAV localization sensors.
K. Fodor, Márton Cserni, A. Rovid· IEEE Access· 0 citations
This work proposes a novel method for constructing point-wise observation confidence by integrating geometric consistency, free-space reasoning, and temporal stability, which retains the observability of geometric constraints while effectively mitigating the impact of dynamic interference, thereby enhancing mapping acc...
Yu-Feng Yang, Chen-Yang Jing· International Conference on...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.