Monitoring Pb2+ levels is essential for aquatic environmental safety. Compared to conventional methods, electrochemical sensors offer a low-cost and efficient alternative for trace heavy metal analysis, with electrocatalytic sensing strategies playing a key role in signal amplification. While biochar (BC) is a promising electrode modifier due to its porous structure and surface functionalization, its application is often restricted by low conductivity. Herein, magnetic biochar (MBC) was prepared via co-precipitation and utilized to fabricate a modified glassy carbon electrode (MBC/GCE). Characterization of MBC revealed an excellent pore structure and a specific surface area of 120 m²/g, markedly higher than that of BC. This increased surface area offers abundant active sites for the adsorption and preconcentration of Pb2+ ions, significantly enhancing the subsequent electrocatalytic reduction process. Electrochemical characterization, including electrocatalytic activity evaluation, showed that the MBC/GCE substantially decreased charge transfer resistance and promotes the redox kinetics of Pb2+. Under optimized conditions, the platform exhibited high sensitivity toward Pb2+ within a linear range defined by I = 6.34 + 64.5C (R2 = 0.996), achieving a detection limit of 68 nmol/L. These results highlight the potential of MBC/GCE as an effective electrocatalytic sensing platform for Pb2+ monitoring in water.
Biochars derived from sunflower hulls and rice husks were chemically activated with chitosan/NaOH and investigated as electrochemical interfaces for trace-metal determination. The treatment improved electrode wettability, charge-transfer properties, and electrochemically accessible surface area, while favouring the in...
M. Mosquera-Ortega, V. Špada, J. Bilić et al.· Talanta: The International J...· 0 citations
In this study, MnCo2O4 is successfully synthesized via a one-pot microwave-assisted hydrothermal method and uniformly integrated into the g-C3N4 framework. The resulting MnCo2O4@g-C3N4 composites are designed for the sensitive and selective detection of the antibiotic CAP and toxic Pb2+ heavy metal ions in aqueous me...
Tu Pham, H. N. Nguyen, Van Hoang Ong et al.· Journal of the Electrochemic...· 0 citations
Paraquat (PQ) is a widely used herbicide categorized as an environmental contaminant due to its high toxicity and risk to aquatic ecosystems and human health. In this study, we developed a Screen-printed Disposable Polyethylene Terephthalate (SD-PET) sensor using a green sodium alginate/graphite conductive ink. To maxi...
E. Y. Ito, F. C. Barreto, M. Silva et al.· Discover Electrochemistry· 0 citations
Mercury contamination in aquatic environments poses significant risks due to its toxicity, persistence, and bioaccumulation. Inorganic mercury (Hg²⁺) causes severe neurological and physiological damage, necessitating sensitive and affordable detection methods. Here we report an electrochemical sensor for Hg²⁺ based on...
Abdoulaye Idrissa Kalidou· 10th International Students...· 0 citations
Electrochemical sensing of l-tyrosine is challenging because its oxidation products and other biomolecules can adsorb onto the electrode surface, resulting in electrode fouling and deterioration of sensing performance. To address this limitation, nitrogen- and sulfur-co-doped reduced graphene oxide (NS-rGO) is proposed...
Fathimath Sanooba N. K, S. Alwarappan· Langmuir· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.