Oct 2026· Talanta: The International Journal of Pure and Applied Analytical Chemistry· Vol 314, pp.
130851
· 0 citations· 58 references
Medicine
Abstract
Biochars derived from sunflower hulls and rice husks were chemically activated with chitosan/NaOH and investigated as electrochemical interfaces for trace-metal determination. The treatment improved electrode wettability, charge-transfer properties, and electrochemically accessible surface area, while favouring the in situ electrodeposition of a bismuth film without requiring pre-fabricated metal-film electrodes. Electrodes containing 75 wt% graphite and 25 wt% activated biochar were employed for the square-wave anodic stripping voltammetric detection of Zn2+, Cd2+, and Pb2+. Systematic comparison of the two biomass precursors showed that, despite the improved electrochemical properties induced by chemical activation, feedstock-derived characteristics were retained and continued to influence the electroanalytical behaviour of the resulting electrodes. Under optimized conditions, linear responses for Cd2+ and Pb2+ were obtained over the 25-600 ng mL-1 concentration range (R2 > 0.99), whereas Zn2+ displayed a comparatively weaker and more matrix-sensitive signal, consistent with its known lower affinity for bismuth-film electrodes. Limits of detection of 7.76 and 5.04 ng mL-1 for Pb2+ and 10.16 and 11.49 ng mL-1 for Cd2+ were achieved using GP75SFCs25 and GP75RcCs25, respectively. The electrodes were successfully applied to real seawater samples and, as a proof of concept, coupled with a mild extraction procedure for marine sands, providing recoveries of up to 113% without conventional acid digestion. These results support the interpretation that biochar surface engineering can enhance electroanalytical performance without suppressing the intrinsic feedstock-dependent properties of the material. The integration of waste-derived carbon materials, in situ bismuth-film formation, portable electrodes, and simplified sample preparation provides a practical approach towards decentralized trace-metal monitoring in marine environments.
Monitoring Pb2+ levels is essential for aquatic environmental safety. Compared to conventional methods, electrochemical sensors offer a low-cost and efficient alternative for trace heavy metal analysis, with electrocatalytic sensing strategies playing a key role in signal amplification. While biochar (BC) is a promisin...
Zhe-Peng Zhao, Hai Bo, Li-Jun Ding· BioResources· 0 citations
Copper-containing electroplating wastewater is strongly acidic and highly saline, making efficient treatment challenging. Oxalic-acid-modified sugarcane bagasse biochar was prepared as an anode-side flow electrode for asymmetric flow-electrode capacitive deionization (AFCDI). Sugarcane bagasse biochar modified with 1.2...
Jiang-Nan Peng, Qi-Yu Li, Wei Liu et al.· Water· 0 citations
Metronidazole (MTZ) accumulation in aquatic systems presents severe environmental and public health risks, requiring sensitive trace-level monitoring techniques. Here, we report the development of an electrochemical sensor based on a reduced graphene oxide (rGO) nanocomposite decorated with nickel-containing nanophases...
Abdullah Ibn Masud Mubin, M. Kabir, M. Ehsan et al.· RSC Advances· 0 citations
Selective removal and recovery of Cu2+ ions from industrial effluent was accomplished by a new redox-accelerated capacitive deionization (CDI) electrode with a hierarchical graphene oxide/MIL-88A/activated carbon composite (GO/MIL-88A/AC). The optimal electrode (E4, 6 wt %) exhibits a well-balanced charge storage mec...
Satish Kumar, P. Duarah, M. Purkait· Industrial & Engineering...· 0 citations