Skip to content

Similar papers

Open access Oct 2026

EFFECT OF HEAT TREATMENT ON THE CORROSION RESISTANCE OF AISI 420 MARTENSITIC STAINLESS STEEL: A COMPUTATIONAL AND EXPERIMENTAL STUDY

This study investigates the effect of heat treatment on the corrosion behavior of AISI 420 martensitic stainless steel using a combination of numerical simulation and electrochemical experiments. The specimens were austenitized at 1050°C for 1 h, oil-quenched, and tempered at temperatures ranging from 250°C to 650°C fo...

Son Hoang Tran · 0 citations
Open access Oct 2026

Corrosion Resistance of Plasma-Nitrided AISI 316L Stainless Steel with Intermittent Nitrogen Flow

Low-temperature plasma nitriding of austenitic stainless steels produces an expanded austenite (γN) layer that enhances surface hardness but may generate high residual stress and cracking, compromising corrosion resistance. This work evaluates the influence of nitrogen flow duty cycle on the corrosion resistance of AIS...

A. Vianna, O. P. Calabokis, Y. E. Núñez de la Rosa et al. · 0 citations
Sep 2026

Influence of high-ammonia-potential gas nitriding on the microstructure, mechanical properties, corrosion resistance, and wear behavior of AISI 4340 and AISI 1040 medium-carbon steels

This study investigates the effects of high-nitrogen-potential gas nitriding on nitride-layer formation, microstructure, hardness, corrosion resistance, and wear performance of unalloyed AISI 1040 (0.39 wt.% C) and alloyed AISI 4340 (0.35 wt.% C) steels. Gas nitriding was performed at 520 °C for 8 h using an atmosphe...

B. Yamanel · 0 citations
Open access Oct 2026

Experimental analysis of AISI 304 stainless steel machinability utilizing TiO₂ and ZnO nanoparticle-infused emulsifier oil-based cutting fluids

This study investigates the effectiveness of nanoparticle-dispersed cutting fluids in minimizing temperature rise and improving machining quality. During the precise turning of AISI SS304 stainless steel, excessive heat generation at the work-tool interface can undermine tool durability and surface finish. Two types...

Thillikkani Shanmugam, V. Kandasamy, Rajasekaran Janakiraman et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.