Skip to content
Open access

Analysis of the Mechanical Properties and Microstructure of Wood‐Plastic Foam Using Walnut Shell and Teak Sawdust

Oct 2026 · SPE Polymers · 0 citations · 24 references

Abstract

Wood‐plastic composites (WPCs) combine natural fibers with polymers, resulting in versatile materials suitable for various applications. The incorporation of foam manufacturing enhances their properties, making them lightweight and strong. This study builds on previous research by examining two WPCs, walnut shells with high‐density polyethylene (HDPE) and Teak wood with HDPE, each with specified ratios and manufacturing conditions developed using a twin‐screw extruder and a plastic injection molding machine. Different percentages of the blowing agent azodicarbonamide (1%, 1.5%, and 2%) were added to the samples, with injection temperatures set at 185°C, 190°C, and 195°C. Pure HDPE was also tested for comparison. Mechanical properties, including tensile, flexural, and impact strength, were assessed alongside microstructural analysis via scanning electron microscopy (SEM). Results indicated that foaming technology significantly improved WPCs' mechanical properties, particularly flexural and impact resistance, depending on the additive used. Teak composites achieved the highest tensile strength (32.16 MPa) and flexural strength (51.25 MPa) while HDPE excelled in impact strength (83.78 kJ/m 2 ). Taguchi analysis revealed that material type and temperature were key factors influencing performance. SEM analysis showed variations in cell density and size among the samples, reinforcing the advantages of foaming technology in WPC applications.

Read PDF

Similar papers

Open access Oct 2026

Comparative Study of Solid Wood and Medium‐Density Fiberboard Fibers as Reinforcements in Polypropylene‐Based Wood‐Plastic Composites

The demand for high‐performance polymer composites has driven the use of lignocellulosic fillers as functional reinforcements. This study investigates the influence of solid wood flour (SWF) and medium‐density fiberboard‐derived flour (MDFF) on the morphological, mechanical, thermal, and hygroscopic properties of p...

Anderson Ravik dos Santos, T. F. Ramos, Felipe Zolini Medeiros et al. · 0 citations
Open access Oct 2026

Modifying Mechanical Polymer Composite by Using Hybrid Materials

This study investigates the characteristics of polymer resin reinforced with sunflower shell particles (SSP) with the aim of exploring the mechanical properties of hybrid composites. First, prepare an epoxy sample, then reinforce the matrix with a glass fiber at a 5% weight fraction, before preparing hybrid composite s...

S. Ahmed, W. Salih, Zahraa Zahraw Al-Janbai · 0 citations
Open access Oct 2026

Physico-mechanical and anisotropic performance of robotic large-scale additive manufacturing using sustainable wood-based PLA composites

This research investigates large-scale additive manufacturing of functional components from wood–based polymer composite on polylactic acid, containing 20 wt% cellulose fibres derived from birch. The main physico-mechanical characteristics of the printed specimens were evaluated, including tensile strength, flexural st...

Osama A. Q. Ziada, A. Chystiakov, J. Čepčianska et al. · 0 citations
Open access Oct 2026

Exploring the thermal and mechanical performance of hybrid bio composites reinforced with agro waste fibers and Turbinella pyrum shell powder

The use of sustainable natural fiber-reinforced polymer composites has attracted considerable attention mainly because they are environmentally friendly and can replace heavy components in engineering. The present work involves making hybrid epoxy composites reinforced with banana stem fiber (BSF), sugarcane bagass...

J. Maniraj, A. Arunkumar, B. Deeban et al. · 0 citations
Oct 2026

High-density polyethylene filled with particulate of three local wood species: physical and mechanical properties

In this research, wood from three types of locally grown trees in Saudi Arabia was used to formulate plastic/wood composites. High-density polyethylene (HDPE) served as the matrix for wood powder. Composites were prepared in the molten state using an internal mixer at 250 °C. Wood powder was added to HDPE at 15 wt-%. T...

F. Alsewailem, Yazeed A. Aljadid, Abdullah S. Jaber et al. · 0 citations
Open access Sep 2026

Mechanical, thermal and interfacial performance of sustainable polypropylene hybrid composites reinforced with short woven hemp fibers, basalt fibers and wheat straw ash

The growing demand for sustainable lightweight materials has encouraged the development of hybrid polymer composites reinforced with natural fibers and agricultural waste. In this study, polypropylene (PP) hybrid composites reinforced with short woven hemp fibers (SWHFs), chopped basalt fibers (BFs), wheat straw ash (W...

Abdelkader Daikh, Noureddine Mahmoudi, M. Bentahar · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.