Skip to content
Open access

Plane-Guided Point-Line LiDAR–Camera Extrinsic Calibration with Finite Line-Segment Constraints

Oct 2026 · Photonics · 0 citations · 33 references

TL;DR

P3LPnP is a plane-guided point-line framework that registers a known-size checkerboard lattice and jointly optimizes point re-projection and finite-segment length, direction, and endpoint position, and real-data evidence supported same-system consistency.

Abstract

Light detection and ranging (LiDAR)–camera calibration requires reliable target reconstruction and robust pose estimation. We present P3LPnP, a plane-guided point-line framework that registers a known-size checkerboard lattice and jointly optimizes point re-projection and finite-segment length, direction, and endpoint position. The front end combines random sample consensus (RANSAC), density-based spatial clustering of applications with noise (DBSCAN), and principal component analysis (PCA). The back end uses iteratively re-weighted least squares with weights fixed during inner solves and exact-Huber step acceptance. In 30 matched synthetic scenes, P3LPnP achieved a plane root mean square error of 0.673 mm. Relative to point-only optimization, finite-segment constraints reduced mean clean-reference re-projection error from 0.441 to 0.399 pixels and translation error from 5.094 to 3.424 mm. Synthetic tests showed translation robustness to point noise and coherent bias, with competitive performance under sparse joint noise. A 30-run controlled replay from one system yielded mean re-projection errors of 0.356 and 0.338 pixels on 100 sparse reference points and 9900 same-session held-out points. Real-data evidence supported same-system consistency; the advantage over the point-line baseline was not statistically significant, and multi-system generalizability remained unverified.

Read PDF

Similar papers

Open access Oct 2026

RGB-D SLAM in Low-Texture Indoor Environments: Complementary Structural Constraints and Resource-Aware Mapping

The evaluated system integrates point-reprojection, endpoint-to-line, direct-plane, and structural plane-relation residuals using information scales and modality coefficients fixed before evaluation to quantify the trajectory-accuracy gains and computational costs of complementary geometric measurements in low-texture...

Fei Nie, Zhuo-Hang Chen, Zhuo-Ling Xiao et al. · 0 citations
Open access Sep 2026

A Geometric-Constraint-Based Extrinsic Calibration Method for Multi-Camera Line-Laser 3D Measurement of Shaft-like Parts

Multi-view line laser measurement systems require accurate calibration among sensors to reconstruct shaft geometries from multiple views. To address the limitations of conventional Iterative Closest Point (ICP)-based registration methods, a multi-camera calibration method based on a hexagonal prism calibration artifact...

Lin-Li Wang, Ming Nie, Yong-Chun Liang et al. · 0 citations
Review Open access Sep 2026

Structure-Aware Calibration Refinement for Monocular Roadside Cameras Using a Horizontal Ground-Coordinate Objective and Road-Patch Phase Correlation

Improved in-sample calibration fit and a lower measured core runtime for phase-based correction in the evaluated patch comparison are demonstrated and interpreted cautiously because single-annotator repeatability was not formally measured.

Ikhyeon Jo, Gooman Park · 0 citations
Preprint Oct 2026

Can a Display Be Used for Rapid LiDAR-Camera Extrinsic Calibration?

ScreenCalib enables light detection and ranging (LiDAR)--camera extrinsic calibration using an ordinary programmable display, providing known visual markers and controlled geometry while reducing dedicated target preparation. The camera observes displayed AprilTags, whereas the LiDAR measures the physical screen surfac...

Zu-Hao Zou, Xiang-Cheng Hu, Jian-Hao Jiao et al. · 0 citations
Open access Sep 2026

Resource-aware structural point-line RGB-D SLAM for dynamic indoor environments

A temporally maintained object-level mask and optical-flow consistency are used to filter unreliable observations, while 3D line landmarks provide complementary structural constraints from the static environment for robust localization in indoor scenes with moving objects, without relying on GPU acceleration.

Seongwon Lee, Hyukdoo Choi, H. Cho · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.