Skip to content
Open access

RGB-D SLAM in Low-Texture Indoor Environments: Complementary Structural Constraints and Resource-Aware Mapping

Oct 2026 · Italian National Conference on Sensors · Vol 26 · 0 citations · 33 references
Medicine

TL;DR

The evaluated system integrates point-reprojection, endpoint-to-line, direct-plane, and structural plane-relation residuals using information scales and modality coefficients fixed before evaluation to quantify the trajectory-accuracy gains and computational costs of complementary geometric measurements in low-texture indoor RGB-D SLAM.

Abstract

Low-texture indoor scenes weaken repeatable point correspondences while often retaining geometric information in image boundaries and depth-supported surfaces. We examine the pose-estimation benefits and resource costs of combining these complementary measurements in RGB-D SLAM. The evaluated system integrates point-reprojection, endpoint-to-line, direct-plane, and structural plane-relation residuals using information scales and modality coefficients fixed before evaluation. Multiple observations of the same physical plane from frames selected for map insertion are consolidated into persistent plane instances, while a compact indoor visual vocabulary supports keyframe-level place recognition. On TUM RGB-D fr3/structure_notexture_near, translational ATE RMSE decreased from 0.052350 m for point only (P) to 0.021353 m for point–line (P + L) and 0.017041 m for point–line–plane (P + L + Π, where P denotes point, L line, and Π plane). Median tracking-call latency increased from 16.174 to 50.589 and 92.505 ms, respectively. The P + L + Π ATE RMSE was 10.3–18.9% below the published results of three closely related PLP methods on the same sequence. Across four ICL-NUIM sequences, reconstruction RMS remained within 0.020–0.055 m. The indoor vocabulary reduced storage from 145.3 to 15.7 MB and loading time from 3235 to 255 ms. Across three P + L + Π runs and 221 valid resource samples, median resident set size was 840.5 MiB, peak resident set size remained below 1.08 GiB, median CPU demand was approximately 1.84 logical cores, and swap consumption remained zero. The results quantify the trajectory-accuracy gains and computational costs of complementary geometric measurements in low-texture indoor RGB-D SLAM.

Read PDF

Similar papers

Open access Sep 2026

Resource-aware structural point-line RGB-D SLAM for dynamic indoor environments

A temporally maintained object-level mask and optical-flow consistency are used to filter unreliable observations, while 3D line landmarks provide complementary structural constraints from the static environment for robust localization in indoor scenes with moving objects, without relying on GPU acceleration.

Seongwon Lee, Hyukdoo Choi, H. Cho · 0 citations
Open access 2026

Dynamic-Aware Point-Line Visual SLAM with Loop-Consistent Semantic Mapping

PLCS-SLAM is presented, a visual localization and mapping system for dynamic and low-texture environments that combines depth-aware semantic gating with probabilistic geometric verification to suppress dynamic outliers while preserving valid static features.

Bo Jiang, Meng-Chen Xu, Cheng-Long Li et al. · 0 citations
Review Open access Oct 2026

HDMap-SLRC: Semantic-Landmark Residual Correction for Monocular HD-Map Georeferencing

The results support the feasibility of the staged georeferencing structure under the evaluated conditions, and the evaluated monocular reconstructions can be linked to an HD-map reference, although the remaining meter-level errors do not establish suitability for lane-level autonomous driving.

Eun-Joo Suk, Yo-Han Han, Gwangjae We et al. · 0 citations
Open access Oct 2026

Plane-Guided Point-Line LiDAR–Camera Extrinsic Calibration with Finite Line-Segment Constraints

P3LPnP is a plane-guided point-line framework that registers a known-size checkerboard lattice and jointly optimizes point re-projection and finite-segment length, direction, and endpoint position, and real-data evidence supported same-system consistency.

Jian-Wen Guo, Bo Liu, Y. Shan et al. · 0 citations
Open access Sep 2026

Mono3DGS-SLAM: Reliability-Aware Geometric Canonicalization for Monocular Gaussian–TSDF Reconstruction

Monocular Gaussian SLAM must recover camera motion, surface structure, and appearance from an RGB sequence without metric depth input or benchmark geometry during reconstruction. This setting is challenged by scale-ambiguous predictions, spatially varying reliability, and the tendency of an unconstrained Gaussian map t...

Ying-Cai Wan, Bao-Yu Wang, Ji-Qian Xu et al. · 0 citations
Open access Oct 2026

GAMPoint: Geometry-augmented vision transformer with a multimodal-ready interface for 3D point-cloud segmentation

Various 3D point cloud semantic segmentation methods have been proposed, yet they remain challenged by limited use of geometric cues and inaccurate predictions around thin structures, object boundaries, and rare classes in cluttered indoor scenes. To address these limitations, we propose GAMPoint, a transformer-based f...

Xin-Yu Mu, Xuan He, Zi-Qi Huang et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.