This paper presents an outcrop-constrained deterministic workflow for improving reservoir characterization where core and borehole-image coverage is limited. The objective is to establish a geologically defensible facies framework that can be transferred from a surface analog to conventional well logs and subsequently used to populate a three-dimensional static model. The workflow is designed for heterogeneous carbonate-dominated systems in which lithology-based interpretation alone does not adequately represent depositional architecture.
The methodology integrates sedimentological and petrographic analysis of a representative outcrop section with gamma-ray, resistivity, neutron, density, and photoelectric-factor responses from four subsurface wells. Five surface facies were identified: shoreface sandstone, sand flat, mixed flat, mud flat, and carbonate facies. The outcrop-derived facies log was used to calibrate characteristic log responses, with Well-X serving as the master calibration well. The calibrated interpretation was propagated to the remaining wells through stratigraphic correlation and multi-log integration, then integrated with seismic interpretation, well tops, depositional geometry, vertical proportion trends, and facies-transition relationships to construct a deterministic three-dimensional facies model.
The workflow provides a more geologically constrained representation of reservoir architecture than lithology-only interpretation. The deterministic model captures lateral facies transitions, vertical stacking, depositional fairways, heterolithic barriers, and stratigraphic compartmentalization. Petrophysical properties were distributed under facies control. Independent laboratory observations show porosity of approximately 8.57–19.94% and permeability of 0.03–4.50 mD across representative plugs, demonstrating substantial textural and flow-property variability. The model also identifies differences in reservoir quality between wells and stratigraphic intervals.
The principal contribution is a practical, data-efficient method for transferring depositional information from outcrop to subsurface interpretation when direct facies calibration data are sparse. Rather than relying primarily on unconstrained stochastic facies simulation, the workflow uses an explicit geological analog to constrain facies geometry and continuity. The approach is transferable to heterogeneous carbonate and mixed carbonate–siliciclastic reservoirs where improved facies definition is required for static modeling, reservoir quality prediction, and development planning.
Subsurface uncertainty in carbonate reservoirs is strongly influenced by how well depositional architecture can be recognized, validated, and translated into development decisions. This paper presents an integrated seismic stratigraphic workflow applied to an onshore Abu Dhabi carbonate reservoir, where a clinoform-b...
Lian Hou, J. Ahmed, A. Hussain et al.· ADIPEC· 0 citations
Characterizing carbonate reservoirs is notoriously difficult due to lateral heterogeneity, facies complexity, and diagenetic overprints. In the East Mediterranean, offshore Egypt, the Cretaceous carbonate reservoir has been traditionally divided into four levels (L1-L4) using seismic and well-log data. However, corre...
Prior site-scale digital outcrop twin studies have demonstrated that centimeter-scale models can quantify reservoir heterogeneity and support subsurface interpretation (Zhang et al. 2026). Building on that foundation, this paper focuses on the next workflow problem: how multiple outcrop blocks can be organized, analy...
Lan Li, Jun Zhu, Chang-Jiang Wu et al.· SPE Asia Pacific Oil & G...· 0 citations
This paper presents an integrated reservoir-characterization workflow for building a 3D facies model in a carbonate-rich unconventional reservoir onshore Abu Dhabi. The workflow integrates core lithofacies, core-calibrated facies prediction from well logs, seismic-inversion-derived 3D properties, spatial trends, and...
S. Mykhaylenko, C. Wells, O. Nielsen et al.· ADIPEC· 0 citations
Closed-loop geothermal development is inherently challenging when hosted in foliated metamorphic basement. This study analyses a feasibility well with two sidetracks to assess the geothermal potential of a complex metamorphic basement, characterize key geological and petrophysical properties, and identify drilling ap...
C. Ciuperca, V. Hanumolo, R. Sofonea et al.· ADIPEC· 0 citations
Chasing remaining hydrocarbon potential in mature brownfields is increasingly challenging where stratigraphic architecture, erosional processes, and subtle structural features create reservoir compartments that cannot be reliably resolved from conventional structural interpretation alone. This paper presents a geobod...
I. Yahia, Mohamed Mahmoud Abdelrahman, Abdel-Motalib Abdel-Salam et al.· SPE Annual Technical Confere...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.