INFLUENCE OF BIOFUEL COMBUSTION PRODUCTS ON THE INTEGRITY OF FUEL UNIT LININGS. PART 2. EXPERIENCE IN USING FIBROUS INSULATION WHEN FUELING A HEATING FURNACE WITH SUNFLOWER MEAL
Oct 2026· Energy Technologies & Resource Saving· Vol 88, pp. 83-98· 0 citations· 19 references
Abstract
The second part of this study provides a physicochemical substantiation of the degradation processes in aluminosilicate refractories upon contact with high-alkaline plant-based ash. Based on the analysis of the ternary phase diagrams of the K2O–Al2O3–SiO2 system, a fundamental vulnerability of typical industrial refractories to potassium attack has been established. It is demonstrated that regardless of the Al2O3/SiO2 ratio in the material composition, interaction with the ash components from the combustion of sunflower husks and meal inevitably shifts the system’s composition toward low-temperature eutectics. This indicates that high-alumina mullite systems do not provide sufficient chemical resistance under these conditions: at operating temperatures exceeding 1100 °C, contact with high-potassium ash leads to the formation of a significant amount of liquid phase (eutectic melt). This mobile melt wets the refractory surface and interacts intensively with its components, provoking structural degradation and subsequent melting. The results of the thermodynamic analysis are confirmed by chemical analysis of actual lining samples using X-ray fluorescence (XRF) analysis, which recorded an accumulation of up to 19 % of K2O. It was established that the failure of ceramic fibre-based furnace linings results from the loss of properties due to changes in the phase composition within the contact zone. The study concludes that it is necessary to develop and implement methods for protecting zones of intensive contact between alkaline ash and refractories, combined with improving the aerodynamic characteristics of the furnace and, where possible, transitioning from aluminosilicate to alkali-resistant spinel linings. Bibl. 52, Table 1, Fig. 4.
Growing demand for alternative fuels and effective waste management solutions has increased interest in using refuse-derived fuel (RDF) in coal-fired power plants. However, ash deposition remains a major barrier to large-scale RDF use in developing economies, and safe blending limits for Indonesian RDF with high plasti...
H. Hariana, N. Teguh, A. Darmawan et al.· Waste Management· 0 citations
Epoxy spacers in gas-insulated substations (GIS) and transmission lines (GITL) accumulate surface charge under HVDC stress, distorting the electric field and lowering flashover voltage. Here, γ-rich alumina and α-Al2O3 nanofillers were synthesized from recycled aluminum beverage cans through acid dissolution, carbonate...
Mahmoud Ezzat, M. Ramadan, Musa A. Said et al.· RSC Advances· 0 citations
The production of ordinary Portland cement (OPC) is a carbon-intensive process that generates significant amounts of carbon dioxide gas from the combustion of fossil fuels and the thermal decomposition of limestone. Overall, the cement industry is responsible for around 7% of global carbon dioxide emissions, which pose...
Renju C. M.· Journal of Green Constructio...· 1 citation
This study investigates the pyrolytic processes and thermomechanical properties of polyurethane (PU) foamed composites filled with ashes obtained after sunflower husk combustion and conventional coal combustion, as well as their silanized derivatives. The results indicate that an improvement in thermal stability during...
Artur Bukowczan, Patrycja Zakrzewska, Paulina Zając et al.· Materials· 0 citations
According to the Spatial Development Strategy of the Russian Federation for the period up to 2025, the production of mineral heat-insulating materials, including mineral wool, has been included in the list of promising economic specializations of the constituent entities of the Russian Federation. The production of min...
O. G. Modzelevskaya, A. Feoktistov, A. A. Kutsenko et al.· Vestnik IGEU· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.