Skip to content
Open access

A Pose-Only Point–Line Geometric Representation Framework for Visual–Inertial Localization of UAVs and UGVs in Complex Environments

Oct 2026 · Drones · Vol 10, pp. 814 · 0 citations

TL;DR

A unified pose-only measurement model is developed for MSCKF point and line features, which improves localization accuracy while maintaining processing efficiency comparable to that of the corresponding point-line system without the pose-only formulation.

Abstract

Accurate visual–inertial localization is essential for unmanned aerial vehicles (UAVs) and unmanned ground vehicles (UGVs) operating in challenging environments. However, conventional multi-state constraint Kalman filter (MSCKF)-based visual–inertial odometry (VIO) uses landmark-based measurements with null-space projection and often delays visual updates until feature tracks end, while point-based systems may provide insufficient geometric constraints under low texture, motion blur, and illumination variations. To overcome these limitations, we extend our preliminary conference work, POPL-VIO, into a complete state estimation framework built upon pose-only (PO) representations for both point and line features. Specifically, a unified pose-only measurement model is developed for MSCKF point and line features. Feature geometry is substituted before linearization, avoiding independent landmark Jacobians and null-space projection while enabling state updates as soon as three valid views are available. Long-track SLAM points and lines are retained in the hybrid filter state and updated using landmark-based measurements. To improve the quality of geometric constraints, the unified base-frame selection algorithm of POPL-VIO is refined and analyzed for both feature types. Additionally, to ensure observational reliability in challenging environments, a stringent outlier rejection mechanism integrating image grid segmentation and bidirectional optical flow consistency is proposed. An observability analysis shows that the PO point and line measurements preserve the four fundamental unobservable directions of visual–inertial navigation, both in the linearized system and, under compatible first-estimate Jacobians, in the filter. The method is evaluated on the EuRoC MAV and KAIST Urban datasets, as well as self-collected indoor sequences acquired by manually carrying a UAV-configured sensor suite to produce UAV-like sensor motion and separate ground-platform sequences. The proposed method achieves the lowest mean ATE among the evaluated methods on EuRoC and KAIST, with mean errors of 0.103 m and 9.07 m, respectively, and also improves the mean results on the self-collected sequences. On the EuRoC MH_01 sequence, it achieves an average processing rate of approximately 35 Hz on the tested PC. These results indicate that the proposed pose-only formulation improves localization accuracy while maintaining processing efficiency comparable to that of the corresponding point-line system without the pose-only formulation.

Read PDF

Similar papers

Open access 2026

Ground-Vehicle-Assisted Monocular vSLAM Correction for UAV Pose Estimation

The results demonstrate that an ordinary globally localized ground vehicle can provide useful metric drift correction for monocular UAV vSLAM without artificial markers, UWB ranging, or additional onboard UAV localization sensors.

K. Fodor, Márton Cserni, A. Rovid · 0 citations
Open access Dec 2026

LDGC-VIS: A Lightweight Differentiable Geometric-Constraint Framework for Visual-Inertial Relative Pose Estimation on Micro-Nano Uncrewed Vehicles

Visual-inertial relative pose estimation in Global Positioning System (GPS)-denied environments remains challenging for micro-nano uncrewed vehicles under strict size, weight, and power (SWaP) constraints. We propose LDGC-VIS, a lightweight differentiable geometric-constraint framework for monocular visual-inertial rel...

Fei Pan, Yu-Xiang Dai, Wen Jiang et al. · 0 citations
Open access 2026

Dynamic-Aware Point-Line Visual SLAM with Loop-Consistent Semantic Mapping

PLCS-SLAM is presented, a visual localization and mapping system for dynamic and low-texture environments that combines depth-aware semantic gating with probabilistic geometric verification to suppress dynamic outliers while preserving valid static features.

Bo Jiang, Meng-Chen Xu, Cheng-Long Li et al. · 0 citations
Sep 2026

Robust Active-Perception Control for Global-State-Free Aerial-Ground Cooperation

Aerial-ground cooperation requires real-time UAV--UGV relative-state information. Instead of maintaining global estimates for both robots, direct control in a UGV-attached non-inertial frame avoids reliance on global localization. Vision-based relative pose estimation with a passive marker offers a low-cost and effecti...

Ming-Xuan Zhang, Jia-Jun Yu, Bao-Zhe Zhang et al. · 0 citations
Open access Oct 2026

MSR-SLAM: A Multi-Stage Map-Refinement Framework for Reliable LiDAR–Inertial SLAM in GPS-Denied Environments

MSR-SLAM is presented, a multi-stage map-refinement framework built on an existing LiDAR–inertial odometry front end that rejects constraints whose candidate-induced translational or rotational correction exceeds preset limits before they can affect the active pose graph.

Munef El Muhammed, Anas Mahyoub Naji Saeed Alqadhi, M. A. M. S. Bajhaw et al. · 0 citations
Preprint Oct 2026

Visual-Inertial Odometry for Ground Robots with Dynamic Camera-IMU Extrinsic Calibration

Visual-inertial odometry systems are often constrained by the assumption that sensors are rigidly mounted, which limits their adaptability in practical scenarios involving structural motion. To address this limitation, this paper investigates time-varying camera-IMU extrinsic calibration. First, a dynamic camera-IMU ex...

Bo Dong · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.