Skip to content
Log in
Sponsored AI Networking Cookbook: Practical recipes for AI-assisted network automation and development AI Networking Cookbook: Practical recipes for AI-assisted network automation and development

Similar papers

Open access Sep 2026

Modelling and Simulation of V/F Controlled Induction Machine Fed by Very Sparse Matrix Converter involving Space Vector Strategies

Very Sparse Matrix Converters (VSMCs) are a reduced-switch version of conventional AC-AC conversion systems, but have not been extensively explored with respect to their influence on the dynamic performance of Induction Motor (IM) drives. In this study, the goal is to develop a closed-loop V/F controlled induction mach...

Parthasarathy Ramamoorthy · 0 citations
Sep 2026

Modeling and simulation of induction motor stall under voltage drop considering magnetic saturation and skin effect

To accurately describe the dynamic response of an induction motor during a voltage drop-induced stall, a nonlinear model of the motor was developed, incorporating the effects of magnetic saturation and the skin effect. An 11 MW high-voltage, high-power induction motor was selected for verification, and the applicabilit...

Jun Wang, Jin-Ping Kang, Jian He et al. · 0 citations
Conference Sep 2026

Digital Model and Experimental Implementation of Suboptimal Control of Induction Motor

This article examines a digital model of an induction motor (IM) speed control system using a thyristor voltage converter (TVC). The model, using timing diagrams, clearly demonstrates the feasibility of reducing the IM stator current at idle and under load conditions lower than the nominal value. This is particularly r...

V. Goun, A. A. Bakin, A. Anikin · 0 citations
Open access Sep 2026

Dynamic and Statistical Analysis of a Three-Phase Induction Motor Under Stator Resistance and Rotor Inertia Variations Using MATLAB/Simulink

Three-phase induction motors are widely used in industrial applications, and they are the backbone and driving force of modern manufacturing and production lines, owing to their robustness, reliability, and low maintenance requirements. However, variations in machine parameters such as electrical or mechanical paramete...

Ayodeji Joseph Akinremi, I. Okakwu, A. Okubanjo · 0 citations
Open access 2026

Vector modeling of the transient process in an electric network with a voltage of 6-10 kV under the action of an automatic transfer switch

Introduction. In 6-10 kV electrical networks with high-power induction motors, emergency modes accompanied by voltage sags, motor starts, and self-starts significantly reduce the reliability of power supply. The selection of the Automatic Transfer Switch (ATS) operating speed is of particular importance, as the superpo...

B. A. Korobeinikov, A. M. Oppakhodzhaev, D. I. Sidorov · 0 citations
Open access Sep 2026

Modelling and analysis of doubly fed induction generator wind turbine based on experiments and simulation

This paper presents a performance analysis of the doubly fed induction generator (DFIG) connected to the grid. The performance of the DFIG system is analysed under a variable wind speed profile. The laboratory experiments are carried out using the LUCAS-Null wind power system. The wind speed variations are made by Luca...

Salhi Houria, M. El-Shimy, S. Louarem et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.