Skip to content
Open access

Numerical Simulation and Validation of In Situ Stress Field in Fractured-Vuggy Carbonate Reservoirs: A Case Study of the Aiding Block, Tahe Oilfield

Oct 2026 · Applied Sciences · Vol 16, pp. 10065 · 0 citations · 36 references

Abstract

Accurate characterization of the in situ stress field in ultra-deep fractured-vuggy carbonate reservoirs is essential for optimizing hydraulic fracturing design and well trajectory planning. This study presents a numerical investigation of the stress field in the Aiding block of the Tahe Oilfield, a typical ultra-deep (6500–7500 m) carbonate reservoir. A three-dimensional geological model incorporating faults and fractures was constructed based on seismic interpretation and well logging data. A hybrid discrete fracture network–finite element method (DFN-FEM) model was implemented, and the governing equations, DFN-FEM coupling strategy, boundary conditions, and solver settings are documented to ensure reproducibility. Karst caves are represented as equivalent weak materials rather than true voids because of their complex geometry and filling. A local mesh-convergence study and sensitivity analysis were performed for key model parameters, including fault/fracture modulus, Poisson’s ratio, normal and shear stiffness, stress gradients, fault-zone width, fracture density, and boundary conditions. The simulation results were validated against closure pressures derived from G-function analysis of fracturing pressure data from four wells. The results reveal that: (1) vertical stress (120–150 MPa) is the maximum principal stress and primarily depth-dependent, while σH and σh range from 100 to 130 MPa and 80 to 95 MPa, respectively, with fault zones exhibiting 10–20 MPa reduction and compressional fault zones showing localized stress concentration; (2) fault-induced stress disturbances follow characteristic patterns—stress minima at fault cores, gradual recovery away from faults, stress concentration at fault tips, and rotation of σH from NE30° to NE10–50° and σh from NW320° to NW300–350°; (3) intersecting faults exhibit the most complex distributions and lowest stress values at intersections; and (4) the fault influence zone of 10–20 m under the current grid resolution; after local refinement, it should be regarded as an apparent influence zone and used with caution for cluster spacing optimization. Stress reduction in fault zones suggests lower injection pressures for fracture initiation in faulted intervals and higher pressures near compressional faults.

Read PDF

Similar papers

Oct 2026

Stress field-driven fracture prediction in ultra-deep carbonate reservoirs: A coupled numerical-analytical framework based on Griffith and Mohr–Coulomb failure criteria

Ultra-deep carbonate reservoirs are currently a key focus in global oil and gas exploration. However, owing to complex tectonic evolution, intense diagenetic modification, and strong heterogeneity, the effective prediction of fracture distribution faces major challenges. The Ordovician Yijianfang and Yingshan formation...

Peng-Lin Zheng, Hui Zhang, Ke Xu et al. · 0 citations
Nov 2026

Numerical Simulation of Complex Fracture Propagation Considering Production-Induced 4d Geomechanics Variation

Unconventional reservoirs are commonly characterized by well-developed natural fractures, pronounced heterogeneity, and anisotropy. Long-term production continuously alters reservoir geomechanical conditions, resulting in substantial differences in complex hydraulic-fracture propagation between infill and parent well...

Wen Hou, Qin Hu, Dong Zhao et al. · 0 citations
Nov 2026

Geomechanical Twin Modeling for Ultradeep Fractured-Vuggy Carbonate Reservoirs-A Case Study from China

Fault-controlled fractured-vuggy reservoirs are extensively developed in ultradeep carbonate strata, and their formation and distribution are closely related to the in situ stress state. Since fractured-vuggy carbonate reservoirs exhibit the characteristics of both discrete and continuous media, conventional methods...

Peng Wang, Fei Li, Wei Zhou et al. · 0 citations
Open access Oct 2026

Numerical Simulation of Hydraulic Fracturing in Coal Reservoirs Based on a Damage–Seepage Coupled Model and Optimization of Perforation Parameters

Coal reservoirs exhibit strong heterogeneity and complex in situ stress conditions, and the initiation and propagation of hydraulic fractures are jointly controlled by reservoir geology and perforation design. A damage–seepage coupled numerical model was established on the COMSOL Multiphysics platform (Version 6.2) by...

Bao-Lei Xie, Zhi-Wen Xue, Yong-Qiang Ma et al. · 0 citations
Open access Oct 2026

Natural Fracture Characterization and Geothermal Well Placement Optimization Based on THM Multiphysics Simulation: A Case Study from the JR Block, Huabei Oilfield

Natural fractures play a key role in controlling fluid flow and heat extraction in carbonate geothermal reservoirs. Due to the high degree of rock fragmentation and strong seismic wave absorption at the top of the carbonate formation, it is difficult to identify the distribution of natural fractures inside the carbonat...

Qiu-Cheng Zhou, Xin-Pu Shen, Mei-Si Wang et al. · 0 citations
Nov 2026

Coupled Geomechanics-Flow Simulation of Deformation-Driven Pore Volume and Permeability Evolution, Fault Stability, and Intra-Reservoir Connectivity

The implications for hydrocarbon and water production play a crucial role in the context of field development planning, with particular emphasis on the role of present-day stress orientation and natural fracture behavior in influencing well and completion design. A 4D geomechanics study was conducted in a heavily fau...

J. A. Al Seiari, A. Vantala, H. Al Hashmi et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.