Oct 2026· Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu· 0 citations
Abstract
Purpose. To establish the regularities governing the evolution of the stress–strain state of a rock mass during mining operations in closely spaced coal seams with weak surrounding rocks, typical of the Western Donbas conditions, taking into account the spatial and temporal interaction between longwall faces and development gateroads.
Methodology. The stress–strain state of the rock mass surrounding both longwall and development workings is determined using the finite element method (FEM). The study emphasizes the combined use of both two-dimensional and three-dimensional computational schemes, as well as different deformation models. In particular, a three-dimensional elastic FEM model is employed to simulate the spatial interaction between the longwall face and the gateroad; a two-dimensional elastoplastic FEM model based on the generalized Hoek–Brown failure criterion is used to analyze the stress state in the gateroad cross-section. A comprehensive approach is proposed, involving the consistent integration of these models within a unified numerical modeling framework, enabling a more accurate representation of the spatial–temporal evolution of mining operations and the interaction between excavations.
Findings. The study reveals the regular patterns of increasing stress concentration within the rock mass located between the advancing faces of the longwall and the gateroad, which move toward each other at different horizontal levels (coal seams). A critical distance between the longwall face and the gateroad face has been identified, at which the destructive influence of the upper seam longwall on the lower seam gateroad begins to manifest. Based on the numerical modeling results, a relationship has been established between the extent of the plastic zone in the roof and the decreasing distance between the advancing faces in closely spaced coal seams.
Originality. By combining two-dimensional and three-dimensional computational approaches, as well as integrating elastic and elastoplastic Hoek–Brown models, new regularities of the interaction between a longwall face and an underlying gateroad have been identified. These include the evolution of stress concentration, expansion of plastic zones, increase in displacements, and growth of internal forces in steel arch support elements.
Practical value. The established regularities can be applied in the design of mining operations under similar geological conditions, for the development of support design guidelines for development gateroad, and for improving regulatory documents governing mining in closely spaced coal seams.
Purpose. To develop an adequate geomechanical model of floor heave in long-term underground excavations and to describe the transition from displacement-controlled support loading to load-controlled support loading.
Methodology. This involves a step-by-step modelling of the heaving process, taking into account the re...
K. Kravchenko, O. Hryhoriev, N. Khoziaikina et al.· Naukovyi Visnyk Natsionalnoh...· 0 citations
Purpose. Determination of the mechanism governing the formation of the stress-strain state of a rock mass during the merging of the cross-section of an active mine working with a stope face area, achieved by reducing the pillar between them within the plane of a thin coal seam.
The methods. The mechanism governing the...
O. Kuzmenko· Collection of Research Paper...· 0 citations
This study focuses on the analysis of ground deformations during the excavation of the south branch of the twin tunnel T26, constructed adjacent to the Panagopoula landslide — one of the largest landslides recorded in Greece. The tunnel, part of the Elefsina–Korinthos–Patras motorway, crosses a geologically heterogeneo...
P. Alexopoulos, N. Depountis, S. Lainas et al.· IAEG 2026: Engineering Geolo...· 0 citations
: Computer modeling and numerical calculation of concrete face rockfill dams (CFRDs) with deep overburden layers remains challenging because the mechanical response of rockfill materials is highly nonlinear, pressure-dependent, and influenced by particle breakage. To improve the predictive capability of such simulation...
Hao-Yu Mao, Yuan Tian, Jian-Jun Chen et al.· Computer Modeling in Enginee...· 0 citations
An increasing number of water conservancy and hydropower projects are being constructed on deep overburden foundations. Deep overburden foundations have an important influence on the mechanical behavior of earth-rock cofferdams built on them. A three-dimensional coupled seepage–stress finite element model was establish...
Lin Zhu, Shuang-Quan Li, Xue Sun et al.· PLoS ONE· 0 citations
The unconventional reservoir commenced production in 2014 in China. For assuring its engineering efficiency and development benefit, it is critical to accurately understand the geomechanics law and its application in various scales. Accordingly, 3D geomechanics and geology models were built in the scales of the whole...
Chao Chen, Lei Zhang, Jie Wang et al.· ADIPEC· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.